3M 78-8126-0432-6-A, 5797A-MT manual Electrical Products Division

Page 12

Armorcast, Scotch, Scotch-Sealand 3Mare trademarks of 3M Company.

Note: The core material being removed from the Splice Body, Jacket Tubes and adapter are mixed polymers and can be recycled with other waste.

IMPORTANT NOTICE

Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use.

Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture as of the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted.

Electrical Products Division

6801 River Place Blvd. Austin, TX 78726-9000 800/245-3573 http://www.3M.com/electrical

Printed on 50% recycled paper

Printed in USA

with 10% post-consumer

© 3M IPC 2002 78-8126-0432-6-A

Image 12
Contents Cold Shrink QS-III Contents Kit Contents Prepare CableAluminum Place Components on Cable Cable endInstall Splice Mm measured from the Center of connectors78-8126-0432-6-A Install Armor Continuity If Cable is Armored Install Splice Jacket Splice is complete Crimping Tool Die Sets number of crimps/end Electrical Products Division