Place Components on Cable, Cable end

3.0Place Components on Cable

3.1Slide one large cold shrink jacket tube onto

Cable X and one onto Cable Y with the loose core ribbon ends going on the cable last, extending toward the cable ends.

3.2Slide a 3M™ cold shrink splice body onto each core of Cable X with the loose core ribbon

end going on the cable first, away from cable end.

3.3Expand metallic shield sleeves and slide one onto each core of Cable Y. Compress the ends of each shield sleeve together next to the cable armor or jacket, away from the prepared conductor ends.

3.4For 1/0 through 3/0 AWG connectors, or connectors with an O.D. between 0.51–0.76" (13,0–19,3 mm): Slide the cold shrink adapter tube with the WHITE CORE onto the insulation with the loose core ribbon end going on first, away from the cable end.

For 4/0 AWG through 350 kcmil connectors or connectors with an O.D. between 0.68–1.07" (17,3–27,2 mm): Slide the cold shrink adapter tube with the RED CORE onto the insulation with the loose core ribbon end going on first, away from the

cable end.

78-8126-0432-6-A

loose core ribbon end

large jacket tube

loose core ribbon end

splice body

shield sleeve

loose core ribbon end

adapter tube