Rinnai R75LSe, R98LSe, R63LSe, R94LSe installation manual Mounting on the wall, Outline of Remote

Page 31

Remote Controller Installation

Mounting on the wall

1.

Determine a suitable location for the

 

controller.

2.

Make three holes in the wall as shown.

Outline of Remote

3.

Run the cable between the controller and the

 

Rinnai water heater or the controller and

 

another controller.

4.

Remove the face plate from the remote

 

controller using a screw driver.

5.

Connect the cable to the remote controller.

6.

Mount the controller to the wall using the

 

holes drilled in step 2.

securing screw

wiring hole

securing screw

1-21/32"

3-5/16"

Connecting to the R75LSe, R94LSe, R98LSe, and R98LSe-ASME

7.Disconnect the power from the Rinnai water heater.

8.Remove the cover of the Rinnai water heater.

9.Remove the plastic cover from the PCB and electrical connections.

10.Thread the cable through the access hole at the base of the unit and connect the wires to the controller terminals on the right hand side bottom of the PCB.

11.Secure the controller cable using the clamp provided.

12.Replace plastic cover over PCB and then replace the cover of the Rinnai water heater.

REMOTE CONTROL

CONNECTION TERMINALS

REMOTE

CONTROL CABLE

CABLE CLAMP

VA Series Outdoor LS Manual

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents ANS Z21.10.3 CSA REU-VA2535WDTable of Contents R63LSe R75LSe R94LSe R98LSe SpecificationsSafety Definitions Consumer Safety InformationSafety Behaviors and Practices Safety Features Operating Instructions Features Available on Remote ControllersFeatures Description of OperationMC-91-1US & MCC-91-1US Remote Controllers ModelsBC-100V-1US Temperature Options Without a Remote Controller Setting the TemperatureModel Temperature Settings Available ºF Temperature RangesSetting the Sound Volume Voice Prompt Setting the ClockSetting the Water Volume Using the Water Smart / Bath Fill FunctionOverview Filling the Tub Setting Controller to MuteModels MC-91 and MCC-91 Maintenance Error Code Table Error CodesError Fault Remedy Code Accessing Operating Information Trouble Shooting for Common IssuesWater Quality Rinnai Water Heater Flushing the Heat Exchange Error Code LC orGeneral Instructions Installation InstructionsAttachment of the Water Heater Clearances from ApplianceGas Piping Electrical ConnectionGeneral Instructions Pipe Sizing Procedure Example Pressure Relief Valve Water PipingFreeze Protection Rinnai Water Heater Freeze Protection PipingQTY Recommended Piping for Basic InstallationFor this application Recommended Piping for Circulation SystemsYears On Heat Exchanger Years On Parts Optional Piping for Circulation SystemsFlue Terminal Clearances ANS Z21.10.3 CSA Description Canadian Installations US Installations Additional Clearances Vent Terminal Guidelines High Altitude InstallationsConnecting Multiple Water Heaters Number of Connected Water Heaters Accessories NecessaryCable Lengths and Size Remote Controller InstallationConfigurations LocationOutline of Remote Mounting on the wallConnecting to the R63LSe Operating Instructions For Your Safety Read Before OperatingPressure Drop Curve Technical DataOutlet Flow Data Space Heating R63LSe, R75LSe, R94LSe R98LSe, R98LSe-ASME DimensionsHOT Ladder DiagramVA LS Series Period of Coverage from date of purchase Warranty InformationLimited Warranty Consumer SupportWhat will Rinnai do? Rinnai’s other fine products 103 International Drive

R75LSe, R94LSe, R63LSe, R98LSe specifications

The Rinnai R94LSe, R98LSe, R75LSe, and R63LSe are part of Rinnai's premier line of tankless water heaters, designed to provide on-demand hot water efficiently and sustainably. Each model caters to different household needs while offering advanced technologies and features.

The R94LSe boasts a maximum output of 9.4 GPM, making it ideal for larger households. It features a digital display that provides real-time information on temperature settings and performance. The R94LSe incorporates Circ-Logic technology, allowing users to set a schedule for hot water demands, ensuring instant access to hot water when needed. This model also employs a self-diagnostic system, which continually monitors performance and alerts users to any maintenance needs, helping extend the unit's lifespan.

The R98LSe is another powerful option with a maximum output of 9.8 GPM, perfect for homes with multiple bathrooms. It includes a remote control and a user-friendly interface, enhancing user experience. The R98LSe also features a unique indoor venting system, significantly reducing installation constraints, and is designed with energy efficiency in mind. This model's ultra-efficient heat exchanger provides consistent temperature control while minimizing energy consumption, fulfilling the growing demand for eco-friendly products.

For those seeking slightly less capacity, the R75LSe has a maximum output of 7.5 GPM, making it suitable for medium-sized homes. Similar to its counterparts, it utilizes Rinnai’s advanced technology to optimize energy usage. The R75LSe features an integrated freezing protection system and a compact design that allows for flexible installation options both indoors and outdoors.

The R63LSe is the smallest of the lineup, with an output of 6.3 GPM, making it ideal for smaller homes or apartments. Despite its compact size, it does not compromise on efficiency, offering advanced control options and energy-saving features. It includes a digital display for easy monitoring and can be equipped with an optional recirculation pump to enhance water availability.

Overall, the Rinnai R94LSe, R98LSe, R75LSe, and R63LSe models offer a range of capabilities suitable for various household sizes and hot water demands. These tankless water heaters exemplify innovation with their energy-efficient designs, advanced technologies, and ease of use, marking Rinnai as a leader in the market for reliable hot water solutions.
Top Page Image Contents