Connecting to standard AC power

After making all other connections, set the POWER switch to OFF position. Then connect the power cord to a standard AC outlet.

Mounting the amplifier

This amplifier is designed to accept standard rack mounting installations. Two slots on each end of the front panel make it suitable for such an installation.

Tightly secure four mounting screws (not supplied) through these fours slots and into your standard electronics equipment rack.

Turning the amplifier on

1.Turn on the audio input source equipment which is connected to the amplifier INPUT jacks.

2.Set the amplifier’s Channel 1 and Channel 2 output level gain controls to the minimum level settings.

3.Push in the power switch to turn the amplifier on.

Using the power blue LED meters (without PT1201X) The meter pointer position indicates the amplifier output power. For ease of reading in dark environments, the meter is illuminated.

Caring for your Pyle Pro Amplifier

Your Pyle Pro Amplifier is an example of superior design and craftsmanship. The following suggestions will help you care for your amplifier so you can enjoy years of use:

•Keep the amplifier dry. If it gets wet, wipe immediately.

•Use the amplifier only in well-ventilated installations.

•Handle the amplifier gently and carefully - do not drop!

•Keep the amplifier away from dust and dirt.

•Wipe occasionally with a damp cloth to keep it looking new. Do not use harsh chemicals, solvents or detergents!

Using the Channel 1 and Channel 2 Output Level controls

Rotate output level gain clockwise to increase, or counter- clockwise to decrease the output power. To get the best performance with the least sound distortion, always adjust the output level gain so the meter's pointer does not continuously exceed the extreme right of the meter's scale.

CAUTION: It is possible to overdrive the amplifier by setting output level gain too high, which may cause damage or failure.

About the internal clip circuitry (without PT-1201X/1601X/2001X)

Special clip circuitry incorporated into your Pyle Pro amplifier’s design protects the amplifier and speaker system from being damaged from overdriving power.

Under normal conditions, the amplifier’s clip indicator will flicker as the output power momentarily exceeds the level as set by the output level gain selector.

However, under excessive output conditions, the clip indicator lights remain on continuously, alerting you that the special clip circuitry has become active. When this occurs, you should simply reduce the output power level by rotating the Master Volume control counterclockwise.

Amplifier Specifications		PT-1201X	PT-1601X	PT-2001X	PT-4001X

Input Impedance, balanced (unbalanced)		20 k-Ohms (10 k-Ohms)	20 k-Ohms (10 k-Ohms)	20 k-Ohms (10 k-Ohms)	20 k-Ohms (10 k-Ohms)

Continuous Output Power
Stereo Mode		70W x 2	120W x 2	170W x 2	260W x 2
20 Hz to 20 kHz, 8 Ohms		70W x 2	120W x 2	170W x 2	260W x 2
1 kHz, 4 Ohms		110W x 2	170W x 2	230W x 2	400W x 2
Maximum Power, 8 Ohms		100W x 2	160W x 2	220W x 2	300W x 2
Maximum Power, 4 Ohms		130W x 2	210W x 2	260W x 2	450W x 2
Peak Power, 8 Ohms		700W x 2	1100W x 2	1650W x 2	2750W x 2

Bridged Mode		175W x 1	270W x 1	380W x 1	700W x 1
20 Hz to 20 kHz, 8 Ohms		175W x 1	270W x 1	380W x 1	700W x 1
1 kHz, 8 Ohms		200W x 1	320W x 1	440W x 1	800W x 1
Peak Power		1400W x 1	2200W x 1	3300W x 1	5500W x 1

THD at rated output power		0.1%	0.1%	0.1%	0.1%

Frequency Response	+/– 3 dB	10 Hz to 50 kHz	10 Hz to 50 kHz	10 Hz to 50 kHz	10 Hz to 50 kHz

Input Sensitivity for rated output power		1.0V	1.0V	1.0V	1.0V

Signal-to-Noise Ratio	A-Weighted	100 dB	100 dB	100 dB	100 dB

Speaker Impedance		4-16 Ohms	4-16 Ohms	4-16 Ohms	4-16 Ohms
Stereo		4-16 Ohms	4-16 Ohms	4-16 Ohms	4-16 Ohms
Bridged		8-16 Ohms	8-16 Ohms	8-16 Ohms	8-16 Ohms

Power Requirement			120 VAC, 60 Hz / 230 VAC, 50 Hz		120 VAC, 60 Hz

Dimensions H x W x D, inches		3 7/16 x 19 x 10 3/4	5 3/16 x 19 x 12	5 3/16 x 19 x 12	5 3/16 x 19 x 13
(mm)		(88 x 482 x 273)	(132 x 482 x 304)	(132 x 482 x 304)	(132 x 482 x 330)
Weight, lbs (kg)		18.7 (8.5)	22.88 (10.4)	24.64 (11.2)	33 (15)

Here

Stamp

Place

Audio, Inc.	Street	NY 11204
PYLE PRO	1600 63rd	Brooklyn,

PYLE PRO PT-1201X/1601X/2001X/4001X Amplifier Owner’s Manual - 6

7 - PYLE PRO PT-1201X/1601X/2001X/4001X Amplifier Owner’s Manual

PT-4001X, PT-2001X, PT-1201X, PT-1601X specifications

PYLE Audio has established itself as a reputable brand in the audiovisual industry, particularly known for its innovative and powerful amplifiers. Among its extensive product line, the PYLE Audio PT-1601X, PT-1201X, PT-2001X, and PT-4001X stand out for their robust features, advanced technologies, and characteristic performance enhancements.

The PT-1601X is designed for versatility and power, featuring 1600 watts of peak power output. This model is equipped with a high-speed power transformer and a built-in cooling fan that ensures longevity and stability even during intense use. One of its hallmark features is the LCD display that provides real-time information on input, output levels, and other operational parameters, making it easier for users to manage their audio experience effectively.

Moving on to the PT-1201X, this model offers a more compact option without sacrificing power. With peak power output reaching 1200 watts, its analog signal processing technology ensures minimal distortion, allowing listeners to enjoy high-fidelity sound. One of its crucial characteristics is the integrated Bluetooth technology, enabling wireless streaming from a range of devices, making it a great choice for modern audio needs.

The PT-2001X steps up to deliver 2000 watts of peak power, perfect for large events or venues. Its three channels support a diverse range of audio configurations, while the adjustable EQ settings allow for customized sound profiles tailored to various environments. The rugged design and durable chassis make it ideal for both professional and recreational use, ensuring reliability in any setting.

Finally, the PT-4001X is the powerhouse of the range, boasting an incredible 4000 watts of peak power output. It integrates advanced DSP (Digital Signal Processing) technology, promoting clear sound articulation and spatial audio enhancement. This model features over-temperature protection and short-circuit protection, enhancing both safety and performance during high-demand scenarios.

Together, these PYLE Audio models offer a complete solution for anyone looking to elevate their audio experience, whether for personal enjoyment or professional applications. The blend of powerful outputs, technological innovations, and user-friendly features solidifies PYLE Audio’s position as a leader in the amplifier market.