C
L
Align the
Mounting
Brackets
Display
Bottom
Figure 4
4.Match the center of viewing guide with the center line you marked in step 1 (Figure 4).
Display
Bottom
Mounting Bracket
| Viewing |
Center of | Guide |
Display | Center |
Figure 5
5.The mounting brackets are designed with a center of viewing guide on the side of them (Figure 5).
Securing the Mounting Brackets
The Griplates™ have M4, M5, M6 and M8 hole patterns to fit the hardware that your flat panel requires.
NOTE: Your plasma uses M8 x 20 or M6 x 12 Phillips screws, use the M8, or M6, mounting points.
1.Once the mounting brackets are aligned secure the Griplate™ to the flat panel (Figure 6).
NOTE: The dimples of the top plates have to be facing up and the bottom dimples must be facing down.
2.
Screwdriver
M4 M5 M6 M8
DIMPLES FACING UP
DIMPLES
FACING UP
DIMPLES
FACING DOWN
Display Bottom
DIMPLES
FACING DOWN
Figure 6
Page 6 | Installation Instructions |