Installation Instructions | Premier Mounts SCM-103 manual

SCM-103

THE SCM-103 IS HEAVY. IT IS STRONGLY RECOMMENDED THAT THREE PEOPLE PERFORM ALL INSTALLATION STEPS.

Plastic Top

6-32 x 1/4” Set Screw

Step 3. Slide plastic insert plug down cabling and insert into the top of the mounting bracket. A cut out in the mounting bracket is provided that will allow the plastic cap to sit flush with the top of the mounting bracket

Step 4. Locate the 6-32 x 1/4” Set Screw and insert into the sides of the plastic top locking the plastic plug into position. The set screw location is on the side of each plastic top. Tighten the set screw using 1/16” Allen wrench.

Step 5. Route the cable down through the provided holes on the display mounting bracket.

Cable Routing Holes

Page 10