
| Back of | Two small brackets go here |
Back of | (see detail at left) | |
Battery Cabinet #1 | Battery Cabinet #2 |
|
Screw from kit | Screw from kit |
|
| Bracket from kit |
|
Existing Screw | Screw from kit |
Bracket from kit
| Front of | BATTERY | BATTERY |
Front of | CABINET #1 | CABINET #2 | |
Battery Cabinet #1 | Battery Cabinet #2 | Large bracket goes here | |
|
|
(see Figure 15)
NOTE: When cabinets are properly aligned, all cabinet doors will be flush with each other.
Figure 14. Placement of Joining Brackets (Two or More Series 685 Battery Cabinets)
Separate Installation of Series 685 Battery Cabinets
1.Remove the
2.Align the holes in the other small flat bracket with the two holes in the top rear of battery cabinets #1 and #2. Attach each end to its mating hole using an M4×10 hex screw from the field kit (see Figure 14).
|
|
|
Powerware 9350 Series 685 and 1085 Auxiliary Battery Cabinets | 21 | |
Installation Manual 164201408 Rev. P00 053002 |
|
|