Finishing, GAS Installation | Napoleon Grills GDI-44N, GDI-44P

VENT CONNECTION ASSEMBLY

The insert may now be pushed into its final position inside the wood-burning fire- place. Secure the insert to the fireplace using perforated strapping attached to the two securing holes on either side of the unit as shown. We rec- ommend that the trim be in- stalled before the unit is placed into its final position.

FIGURE9

S E C U R I N G

HOLES

FIGURE 7

6.Reinstall the back wall, followed by the log support, us- ing the perimeter screws removed in step 4.

GAS INSTALLATION

Install suitable supply piping connection to the 3/8" flex con- nector supplied (as per local gas codes).

FIGURE8

WALL SWITCH / THERMOSTAT

For ease of accessibility, an optional remote wall switch or millivolt thermostat may be installed in a convenient location. Route 2-strand solid core millivolt wire from the gas fireplace insert to the wall switch / millivolt ther- mostat. The recommended maximum lead length de-

pends on the wire size: WIRE SIZE	MAX. LENGTH
14gauge	100 feet
16gauge	60 feet
18gauge	40 feet

Do not connect either the wall switch, thermo- stat or gas valve to electricity (110 VOLTS).

FINISHING

In order to close off the fireplace opening or if the opening is larger than the 3- or 4-sided aluminium extrusion trim kits, it is recommended to reduce the opening using a noncombustible material such as ceramic tile, marble, etc or the GDIBP3 or GDIBP4 backer plate kits. The GDIBP3 backer plate is able to fit an opening of 52" x 33½". The GDIBP4 backer plate is able to fit an opening of 52" x 42¾". The outside edge of the backer plate is finished off with gold trim included in each kit. A GDIBP3D 3 sided deluxe backer plate complete with marquis trim may also be used to complete the installation. This kit is able to fit an open- ing of 57" x 33½". Detailed installation instructions are in- cluded with each kit.

If this unit is being installed into an existing wood burning, zero clearance fireplace, then be aware of this precaution:

Any circulation air opening may be covered (with mate- rial) but not sealed!

ALUMINIUM EXTRUSION TRIM KIT

INSTALLATION

The insert can be equipped with either a 3- or 4-sided trim kit to finish off the fire- place opening. Slide the trim assembly over the key- holes (2 per side) and drop into place. If installing the optional 3- or 4-sided backer plate (GDIBP3 or GDIBP4), it must be hung prior to the trim kit installa- tion using the same key-

holes.FIGURE 11

FIGURE 10

To adjust the trim: If the mi- tre is out of alignment, open each side and loosen the two screws at either side trim hinge. Slide the trim up or down to adjust and re- tighten screws. There is also a very slight in/out ad- justment that can be made.

Note: Since the side pan- els open and close, to ac- cess the controls, a gap is necessary at the mitre joint.

The top trim piece has an adjustable securing bracket which enables the trim to be secured to the firebox shell.

FIGURE 12

FIGURE 13

SLIDE TO ADJUST

LOOSEN SCREWS

W415-0314 / C / 01.15.04

GDI-44N, GDI-44P specifications

Napoleon Grills has long been a trusted name in outdoor cooking, and their GDI-44P and GDI-44N models exemplify the brand's commitment to quality, performance, and innovation. These gas grills cater to both novice cooks and seasoned grill masters, making outdoor cooking accessible and enjoyable for everyone.

One of the standout features of the GDI-44P and GDI-44N is their impressive cooking surface. With a total cooking area of 825 square inches, these grills can accommodate a variety of dishes simultaneously, making them perfect for large gatherings and family barbecues. The primary cooking area is 644 square inches, providing ample space for grilling burgers, steaks, and veggies, while the secondary cooking area allows for indirect cooking or warming previously grilled items.

Equipped with Napoleon's innovative i-GLOW backlit control knobs, the GDI-44P and GDI-44N ensure visibility during nighttime grilling sessions. This feature not only enhances safety but also adds a stylish touch to the grill’s overall design. Additionally, the LED lights illuminate the cooking surface, allowing for precision cooking even after the sun goes down.

Both models utilize a powerful 44,000 BTU stainless steel burner system that delivers even heat distribution across the grill. The patented wave-shaped grill grates provide exceptional heat retention and sear marks, ensuring that food is cooked to perfection every time. The grills also include a rear infrared burner, ideal for rotisserie cooking, which complements the main grilling area by allowing cooks to prepare a whole chicken, roast, or other large cuts of meat with ease.

Durability is key in the construction of the GDI-44P and GDI-44N. Both grills feature a heavy-duty stainless steel body, which is resistant to corrosion and designed to withstand the elements year-round. The spacious side shelves provide additional prep space and come with integrated tool hooks for convenient access to grilling tools.

In terms of user-friendly technology, both grills feature an easy-to-use ignition system for reliable starts every time. The built-in temperature gauge allows for easy monitoring of cooking temperatures, ensuring perfectly grilled dishes.

In conclusion, the Napoleon Grills GDI-44P and GDI-44N are exemplary models that combine functionality, durability, and style. With their generous cooking space, advanced features, and reliable performance, they represent an excellent investment for anyone looking to enhance their outdoor cooking experience. Whether grilling for a large crowd or a family dinner, these grills deliver exceptional results, making them a worthy addition to any outdoor kitchen.