Peavey PCX-V12 Belt Pack Transmitter, Transmitting Antenna 1/4 wavelength, Gt/Mt, Switch Switch

4.When the microphone is not in use make sure to turn it off to extend the battery life. Remove the battery from the battery compartment if the microphone will not be in use for a long period of time. If a rechargeable battery is used take it out for a recharge as necessary.

BELT PACK TRANSMITTER

1. Unit Features and Functions

1. 4-pin Jack Input Connector: Connects to the Peavey Pro Comm 4-pin connector. Allow 5 different input configurations (See the five

ways of connection on an AF input connection, page 19.)

2.	Transmitting Antenna: 1/4 wavelength
transmitting antenna
3.	GT/MT	1	2
Switch: Switch
to the GT
position for
electric guitar					3
use ONLY. Gain
					4
Control is
irrelevant for					5
“GT” mode.
Switch to the
“MT” position 7
for condenser
microphone,				6
wired micro-
phone or
						Figure	11
Line-in use.
Gain Control
works in the “MT” mode for input sensitivity
adjustments.
		15