Peavey PCX-V12 manual Setup for dual half-rack receivers

3.TWO 19/2-INCH UNITS RECEIVER INSTALLATION A. Setup for single half-rack receiver

1.Push the rack mount brackets (RM-11) upwards until it is firmly attached to the receiver. (Figure 5)

Figure 5

B.Setup for dual half-rack receivers

1.Remove the screws at the top and bottom of the receiver where they will be joined together. Remove one steel plate from each receiver. Push the receivers next to each other. Refer to Figure 6.

2.Insert the steel plate in between the two receivers (top and bottom). Align and fasten the screws tightly as shown in Figure 6.

3.Align and fasten the rack mount

7