Peavey PCX-V12 manual Operation Instructions

4.OPERATION INSTRUCTIONS

1.Turn the volume controls of the receiver and device in use to a minimum setting before turning on the microphone transmitter. After the receivers power switch is set to the on position, the power switch’s red indicator illuminates to denote normal power status.

2.If the SIGNAL LED indicators of the receiver are illuminated before switching on the microphone or transmitter, it indicates the receiver is receiving interference signals. The more LEDs that illuminate the more severity of interference. This system has “Pilotone” and “NoiseLock” dual-squelch features so noise output will not occur. If multiple channels are used and both SIGNAL and AUDIO LEDs illuminate before the transmitter is turned on, simply adjust the Squelch controls clockwise until the AUDIO signal indicators extinguish. (Figure 9). However, by adjusting the squelch controls it affects the sensitivity level of the receiver, therefore, shortening the operating distance and decreasing the stability.

Figure 9

3.Under normal circumstances, the SIGNAL indicator lights up when a microphone or transmitter is turned on near the receiver to indicate the receiver is ready for normal operation. Once sounds enter into the

9