Peerless Industries SS550P manual Attaching Screen with VESA 100 Mounting Pattern, 11 of, No Tilt

Page 11
Attaching Screen with VESA 100 Mounting Pattern

Attaching Screen with VESA 100 Mounting Pattern

11 of 11WARNING

If screws don't get three complete turns in the screen inserts or if screws bottom out and hook plate is still not tightly secured, damage may occur to screen or product may fail.

10

Choose hole pattern as shown in figure 10. Attach

11 Attach hook plate (B) to screen mount bracket (A).

hook plate (B) to back of screen using four M4 x 12

mmscrews. Tighten screws using a phillips screw- driver.

fig 10

M4 X 12 MM SCREWS Manual background

B

B

A

12

Insert two 1/4-20 x 12 mm screws (L) into holes indicated below for desired screen orientation. Tighten all screws

using 4 mm allen wrench (R).

L

L

L

No Tilt

2° Backward Tilt

5° Forward Tilt

 

 

 

 

11 of 11

ISSUED: 09-05-06 SHEET #: 202-9166-7 11-10-08

© 2007, Peerless Industries, Inc. All rights reserved. All other brand and product names are trademarks or registered trademarks of their respective owners.

Image 11
Contents Models SS550P, SS550P-S ISSUED 09-05-06SHEET #ADDITIONAL HARDWARE REQUIRED Tools Needed for AssemblyTable of Contents WALL CONSTRUCTIONPage 4 of Phillips Adapter Bracket FastenersDETAIL N L O CI K C D KM C N6 of J L HADETAIL fig SLOT5 Forward Tilt F B TNo Tilt 2 Backward Tilt8 of Installing Adapter BracketsFor Bump-outor Recessed Back Screen 9 ofFor Flat Back Screen DETAIL Mounting and Removing Flat Panel Screen10 of 2 Backward Tilt Attaching Screen with VESA 100 Mounting Pattern11 of No Tilt