Peerless Industries SS550P manual Phillips Adapter Bracket Fasteners, 4 of

		Phillips Adapter Bracket Fasteners
M4 x 12 mm (6)	M5 x 12 mm (4)		M6 x 12 mm (4)
504-9013		520-1027	520-1128	M8 x 16 mm (6)	M6 x 20 mm (4)	M5 x 25 mm (4)
				520-9257
					520-9402	520-9543
M4 x 25 mm (4)			M6 x 25 mm (4)	M8 x 25 mm (4)
504-1015	M6 x 30 mm (4)			520-1031
			520-1208			multi-washer (6)
		510-9109
						580-1036
					M8 x 40 mm (4)
					520-1136
I.D. .22" (5.6 mm) (4)		I.D. .34" (8.7 mm) (4)
540-1057
			540-1059

1 Cut adhesive felt (S) into four pieces as shown in figure 1.1 below and affix to bottom of base (E).

1-1Attach upright (H) to base (E) using three 3/8-16 x 2.5" socket screws (P). Tighten screws using 7/32" allen wrench (Q).

1-2Run cords through upright (H) using cord management holes as shown in figure 1.2.

CORD MANAGEMENT HOLE

		H
		CORD MANAGEMENT HOLE
S	H	CORD MANAGEMENT HOLE
	E
fig. 1.1	P	fig. 1.2
	4 of 11	ISSUED: 09-05-06 SHEET #: 202-9166-7 11-10-08