Nova 50-0-1818-33, 50-0-1818-24, 50-0-1818-34, 50-0-1818-30, 50-0-1818-27, 50-0-1818-28 manual

The Natural Way to Look at a Computer™

Retrofit Kit

Assembly Instructions

ASSEMBLED VIEW

Model #

50-0-1818

-22, -24, -27, -28, -30, -33, -34

Step 1

If the worksurface is prepared for Retrofit Kit & Keyboard Drawer Installation, skip to Step 3. Otherwise, please prepare your worksurface to the specifications shown in Figure 1a for Viewport & Side Assembly milling/drilling. If using a 24" Adjustable Keyboard

Drawer, please use separate hole pattern shown below.

The retrofit kit can be installed in almost any work surface. The kit is designed to attach to a work surface that is 1-1/8" to 2" in thickness. Thinner work surfaces may require some build-up of material for proper installation. Glass work surfaces are not recommended. If your countertop is a solid material such as natural granite or marble or a fabricated solid surface such as Corian, you should use a professional fabricator to create the opening and surface mounting anchors required for your kit. Forward a copy of the boring pattern and hole size cut out to a professional fabricator.

FIGURE 1a

21-1/4"(540mm)

for all other keyboards

25-1/16"(637mm)

for 24" Adjustable Keyboard Drawer

Step 2

Keyboard Drawer holes (as shown in Figure 1b) should be drilled for the specific keyboard size. Care must be exercised to use the specifications in Figure 1b regarding drill size and hole depth.

To offset the viewport and keyboard drawer, please call

Customer Support at 1-800-730-6682 for special instructions.