Manitowoc Ice Q Section Ice Machine Operation, Automatic Operation, Manual Start Operation

Page 23

Section 3

Ice Machine Operation

 

Section 3

 

Ice Machine Operation

Automatic Operation

The following occurs when the toggle switch is in the ICE position:

•The ice machine control board counts the number of ice harvest cycles.

•The AuCS→A accessory interrupts the ice making mode and starts the cleaning (or sanitizing) mode when the harvest count equals the “Frequency of Cleaning” setting of the AuCS→A

•When the automatic cleaning (or sanitizing) cycle is complete (approximately 25 minutes, QDUAL 40 minutes), ice making resumes automatically, and the “Harvest Count” is reset to zero.

Important

Opening the curtain switch will interrupt the cleaning (or sanitizing) sequence. The sequence will resume from the point of interruption when the curtain re-closes.

NOTE: The harvest count is reset after the AuCS→A cycle is completed. It cannot be reset by unplugging the modular wire, changing the switch position, power loss, etc.

Manual Start Operation

(QDUAL SEE PAGE 3-3)

Step 1 Set the toggle switch to the OFF position after ice falls from the evaporator at the end of a Harvest cycle. Or, set the switch to the OFF position and allow the ice to melt off the evaporator.

CAUTION

Never use anything to force ice from the evaporator. Damage may result.

Step 2 To start the automatic cleaning system, move the toggle switch to the CLEAN position. The water will flow through the water dump valve and down the drain. The Clean light will turn on to indicate the ice machine is in Clean Mode.

The AuCS→A pump energizes automatically to add cleaner or sanitizer to the ice machine.

Step 3 The ice machine will automatically time out a ten minute cleaning or sanitizing cycle, followed by six rinse cycles, de-energize the Clean light and stop. This entire cycle lasts approximately 25 minutes.

Step 4 After the cleaning or sanitizing cycle stops, move the toggle switch to the ICE position.

Step 5 The ice machine may be set to start and finish a cleaning (or sanitizing) cycle, then automatically start ice making again.

You must wait about one minute into the cleaning cycle (until water starts to flow over the evaporator), then move the toggle switch from CLEAN to ICE position.

When the cleaning (or sanitizing) cycle is completed, an ice making sequence will start automatically.

Important

The Q1400C ice machine can not perform step 5. The toggle switch position must be changed from CLEAN to ICE after the AuCS→A cycle has been completed.

3-1

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Automatic Cleaning System Installation Use and Care Manual Model AuCSA AccessoryProcedural Notices Safety NoticesTable of Contents This page Intentionally Left Blank Model/Serial Number Location Freight Damage and Claims ProceduresSection General Information Section General InformationGeneral Information Section Owner Warranty Registration CardWarranty Coverage SV1630G Component Location and IdentificationICE Beverage Models Compatible Ice Machine ModelsModels QUIETQUBE→ ModelsSection Section Installation InstructionsInstallation Instructions Electrical ServiceLocation/Mounting Installation Instructions SectionHeight and Distance Requirements Connection to Ice Machine PVC Conduit Fitting a InstallationSV1637G Qdual PVC Conduit Connection not Supplied Vinyl Tubing Installation Q1400C only Control Board Communication Wire ConnectionVinyl Tubing Connection After InstallationInstalling Bottle Of Solution Determine Type Of Solution NeededHose Priming Changing Solution TypeRemoval From Service/Winterization Setting Frequency Of CleaningsManual Start Operation Section Ice Machine OperationIce Machine Operation Automatic OperationMODELS/IB MODELS/SU1000C Changing Switch Position During Automatic OperationIce Machine Operation Section Qdual only Page Page Manitowoc ICE, INC
Related manuals
Manual 56 pages 32.31 Kb

Q specifications

Manitowoc Ice Q is a leading innovator in the ice-making industry, renowned for its cutting-edge technology and efficiency. This advanced ice machine is designed to meet the increasing demands of various commercial settings, from restaurants to hotels, catering businesses, and beyond. With a commitment to quality and sustainability, Manitowoc has developed the Ice Q to deliver high performance while minimizing environmental impact.

One of the standout features of the Manitowoc Ice Q is its ability to produce a variety of ice types. From traditional cubed ice to flaked and gourmet options, this machine ensures that businesses can cater to diverse customer preferences. The ice produced is not only visually appealing but also ideal for cooling beverages quickly and maintaining their quality.

The Manitowoc Ice Q utilizes SmartCube technology, which significantly enhances energy efficiency. This intelligent feature analyzes the ice-making process in real-time, adjusting water flow and freezing cycles to optimize energy consumption. With this technology, users can expect up to 20% savings on energy costs compared to conventional ice machines. Furthermore, the machine is designed with eco-friendly refrigerants, which further reduce its carbon footprint.

Another defining characteristic of the Ice Q is its user-friendly interface. The machine is equipped with a simple touchscreen control panel that allows operators to monitor performance effortlessly. Maintenance alerts and cleaning reminders ensure that users can keep the machine in peak condition, thus extending its lifespan and reducing downtime.

The compact design of the Manitowoc Ice Q makes it suitable for a variety of spaces, including those where floor space is at a premium. Despite its small footprint, the machine boasts a large storage capacity, allowing establishments to meet high ice demands without sacrificing performance.

Built with robust materials and advanced engineering, the Ice Q ensures durability and reliability. Its stainless steel construction is not only stylish but also resistant to corrosion, ensuring that the machine can withstand the rigors of daily use.

In summary, Manitowoc Ice Q represents a significant advancement in ice-making technology. With features like SmartCube efficiency, versatile ice production, user-friendly controls, compact design, and robust construction, it stands out as an essential solution for businesses looking to improve their ice supply while operating sustainably. Whether for rapid service in a busy bar or supplying ice for catered events, the Ice Q is designed to exceed expectations and deliver exceptional performance.
Top Page Image Contents