Manitowoc Ice Q specifications Ice Machine Operation Section, MODELS/IB MODELS/SU1000C

Ice Machine Operation Section 3

Changing Switch Position During Automatic Operation

Q MODELS/IB MODELS/SU1000C

If the toggle switch is moved to OFF prior to the pump dispensing (less than 45 seconds into the cycle) then switched to:

ICE	A normal ice-making mode begins.
CLEAN	A manual clean cycle begins.
	(See “Manual Start Operation,” page 3-1.)

Q1400C

If the toggle switch is moved to OFF prior to the pump dispensing (less than 45 seconds into the cycle) then switched to:

ICE	A normal ice-making mode begins.
CLEAN	A manual clean cycle begins.
	(See “Manual Start Operation,” page 3-1.)

If the toggle switch is moved to OFF after the pump dispenses (more than 45 seconds into the cycle, but before rinse cycles begin) then switched to:

ICE	The “clean” portion of the cycle begins.
	After completion of the 10-minute
	“Clean” and 6 rinse cycles, the counter
	resets and a normal ice-making mode
	begins.
CLEAN	A manual clean cycle begins.
	(See “Manual Start Operation,” page 3-1.)
	After completion of the 10-minute
	“Clean” and 6 rinse cycles, the counter
	resets and the ice machine awaits a
	change in the toggle switch position.

If the toggle switch is moved to OFF after the 6 rinse cycles have begun and then switched from off to:

ICE	The rinse portion of the cycle restarts and
	continues.
	After completion of the 6 additional rinse
	cycles, the counter resets and a normal
	ice-making mode begins.
CLEAN	A manual clean cycle begins.
	(See “Manual Start Operation”.)
	After completion of the 10-minute
	“Clean” and 6 rinse cycles, the counter
	resets and the ice machine awaits a
	change in the toggle switch position.

If the toggle switch is moved to OFF after the pump dispenses (more than 45 seconds into the cycle, but before rinse cycles begin) then switched to:

ICE	The ice machine runs 6 rinse cycles, resets
	the counter and starts a normal ice-
	making mode.
CLEAN	A manual clean cycle begins.
	(See “Manual Start Operation”)
	After completion of the 10-minute
	“Clean” and 6 rinse cycles, the counter
	resets and the ice machine awaits a
	change in the toggle switch position.

If the toggle switch is moved to OFF after the 6 rinse cycles have begun and then switched from off to:

ICE	The ice machine runs 6 rinse cycles, resets
	the counter and starts a normal ice-
	making mode.
CLEAN	A manual clean cycle begins.
	(See “Manual Start Operation”.)
	After completion of the 10-minute
	“Clean” and 6 rinse cycles, the counter
	resets and the ice machine awaits a
	change in the toggle switch position.

Important

After solution is dispensed (cleaner or sanitizer), the Q1400C ice machine must run 6 rinse cycles. Changing toggle switch position, disconnecting power, etc will not override the 6 rinse cycles. Each time the toggle switch is moved from Off to Ice (or power is interrupted), the six rinse cycles begin again.

3-2