Manitowoc Ice Q specifications Section Installation Instructions, General, Electrical Service

Page 9

Section 2

Installation Instructions

 

Section 2

 

Installation Instructions

General

These instructions are provided to assist the qualified installer. Check your local yellow pages for the name of the nearest Manitowoc Ice Machine Distributor or call Manitowoc Ice, Inc. for information regarding installation and start-up services.

WARNING

Improper installation will affect dispensing rate. Install only within the parameters outlined in this installation manual.

Please contact your local Manitowoc Distributor or call Manitowoc Ice, Inc. for assistance if you encounter a problem that is not covered by this manual.

3.43"

8.7 CM

12”

30.48 CM

12.12"

9’

30.78 CM

274.3 CM

 

8’

243 CM

SV1632G

Dimensions

Electrical Service

WARNING

All wiring must conform to local, state, and national codes.

Voltage/Cycle/

Runnin

N.E.M.A Electrical Plug

Phase

g Amps

Configuration

115/60/1

.3

5-15P

220/240/50/1

.1

No plug attached

115 VOLT WIRING

The 115/60/1 AuCShas an eight (8) foot cord which must be plugged into a 15 amp electrical outlet.

CAUTION

Never use an extension cord. If an outlet is not in reach of the AuCSpower cord, have an outlet installed.

220/240 VOLT WIRING

The 220/240/50/1 AuCScan be wired to:

The terminal block located in the ice machine.

With a separate plug.

To a separate disconnect.

TERMINAL BLOCK LOCATED

IN ICE MACHINE

MACHINE

L1

 

L1

N

 

N

TO ICE

 

 

 

 

WIRED-PRE

GROUND

 

GROUND

 

 

 

 

 

 

 

 

TO SEPARATE FUSE/

 

 

 

CIRCUIT BREAKER.

 

 

 

DISCONNECT ALL POLES.

 

 

 

REFER TO ICE MACHINE

 

 

 

INSTALLATION

 

 

 

INSTRUCTIONS FOR

 

 

 

FUSE RATING.

 

 

 

AuCS® POWER

 

N

L1

CORD

PRE-WIRED AT AuCS® ACCESSORY

SV1633G

220/240/50/1 Wiring

2-1

Image 9
Contents Automatic Cleaning System Installation Use and Care Manual Model AuCSA AccessoryProcedural Notices Safety NoticesTable of Contents This page Intentionally Left Blank Section General Information Freight Damage and Claims ProceduresSection General Information Model/Serial Number LocationOwner Warranty Registration Card Warranty CoverageGeneral Information Section SV1630G Component Location and IdentificationModels Compatible Ice Machine ModelsQUIETQUBE→ Models ICE Beverage ModelsInstallation Instructions Section Installation InstructionsElectrical Service SectionLocation/Mounting Installation Instructions SectionHeight and Distance Requirements Connection to Ice Machine PVC Conduit Fitting a InstallationSV1637G Qdual PVC Conduit Connection not Supplied Vinyl Tubing Installation Q1400C only Control Board Communication Wire ConnectionVinyl Tubing Connection After InstallationInstalling Bottle Of Solution Determine Type Of Solution NeededHose Priming Changing Solution TypeRemoval From Service/Winterization Setting Frequency Of CleaningsIce Machine Operation Section Ice Machine OperationAutomatic Operation Manual Start OperationChanging Switch Position During Automatic Operation Ice Machine Operation SectionMODELS/IB MODELS/SU1000C Qdual only Page Page Manitowoc ICE, INC
Related manuals
Manual 56 pages 32.31 Kb

Q specifications

Manitowoc Ice Q is a leading innovator in the ice-making industry, renowned for its cutting-edge technology and efficiency. This advanced ice machine is designed to meet the increasing demands of various commercial settings, from restaurants to hotels, catering businesses, and beyond. With a commitment to quality and sustainability, Manitowoc has developed the Ice Q to deliver high performance while minimizing environmental impact.

One of the standout features of the Manitowoc Ice Q is its ability to produce a variety of ice types. From traditional cubed ice to flaked and gourmet options, this machine ensures that businesses can cater to diverse customer preferences. The ice produced is not only visually appealing but also ideal for cooling beverages quickly and maintaining their quality.

The Manitowoc Ice Q utilizes SmartCube technology, which significantly enhances energy efficiency. This intelligent feature analyzes the ice-making process in real-time, adjusting water flow and freezing cycles to optimize energy consumption. With this technology, users can expect up to 20% savings on energy costs compared to conventional ice machines. Furthermore, the machine is designed with eco-friendly refrigerants, which further reduce its carbon footprint.

Another defining characteristic of the Ice Q is its user-friendly interface. The machine is equipped with a simple touchscreen control panel that allows operators to monitor performance effortlessly. Maintenance alerts and cleaning reminders ensure that users can keep the machine in peak condition, thus extending its lifespan and reducing downtime.

The compact design of the Manitowoc Ice Q makes it suitable for a variety of spaces, including those where floor space is at a premium. Despite its small footprint, the machine boasts a large storage capacity, allowing establishments to meet high ice demands without sacrificing performance.

Built with robust materials and advanced engineering, the Ice Q ensures durability and reliability. Its stainless steel construction is not only stylish but also resistant to corrosion, ensuring that the machine can withstand the rigors of daily use.

In summary, Manitowoc Ice Q represents a significant advancement in ice-making technology. With features like SmartCube efficiency, versatile ice production, user-friendly controls, compact design, and robust construction, it stands out as an essential solution for businesses looking to improve their ice supply while operating sustainably. Whether for rapid service in a busy bar or supplying ice for catered events, the Ice Q is designed to exceed expectations and deliver exceptional performance.