M-Audio SONO 61 manual Pedal Assignment, Knob Assignment

Page 35

ProKeys Sono 61 User Guide

34

Pedal Assignment

The Sustain pedal can be assigned to send standard MIDI CCs up to 127 and extended custom messages from 128 to 131.. The default for the Sustain pedal is sending MIDI Controller message 64.. Use the G#4 key in Edit mode to change the MIDI CC assignment for the Sustain Pedal..

To assign a MIDI controller message to the Sustain Pedal jack:

1.Press the Edit Mode button..

2.Press the black key above G4 (G#4), representing “Pedal Assign..”

3.Use the Numerical Data Entry keys G4 – B5 to enter the number of the controller value you want to assign to the Sustain Pedal Jack..

4.Press C6 for “ENTER..”

If you make an error while entering the numerical data value, you can press the CANCEL key (C2) to exit Edit mode without changing the MIDI CC assigned to the Sustain Pedal jack..

TIP: Using the Modulation wheel or Voice Volume knob to set the reverb or chorus depth on ProKeys Sono

Changing Reverb Depth

The Modulation wheel and/or the Voice Volume knob can be re-assigned to control the depth of the built-in ProKeys Sono reverb. To do this:

1.Press the Edit Mode button.

2.Press either the Wheel Assign (F#4) or Knob Assign (A#4) key.

To re-assign the Sustain Pedal jack to its default function:

1.Press the Edit Mode button..

2.Press the black key above G4 (G#4), representing “Pedal Assign..”

3.Press the F4 key (Default).. When the Default key is pressed, the parameter is reset to its default value, and Performance mode resumes..

Knob Assignment

The Voice Volume knob can be assigned to any of 132 controllers (0-131) shown at the back of this manual in Appendix C..

To assign a MIDI controller message to the Voice Volume knob:

1.Press the Edit Mode button..

2.Press the black key above A4 (A#4), representing “Knob Assign..”

3.Use the Numerical Data Entry keys G4 – B5 to enter the number of the controller value you want to assign to the Voice Volume knob..

4.Press C6 for “ENTER..”

If you make an error while entering the numerical data value, you can press the CANCEL key (C2) to exit Edit mode without changing the MIDI CC assigned to the Voice Volume knob..

To re-assign the Voice Volume knob to its default function:

1.Press the Edit Mode button..

2.Press the black key above A4 (A#4), representing “Knob Assign..”

3.Press the F4 key (Default).. When the Default key is pressed, the parameter is reset to its default value, and Performance mode resumes..

3.Press B5 to enter “9.”

4.Press A4 to enter “1” so you have entered “91.”

5.Press C6 for “ENTER.”

This setting can be undone by powering the unit off and back on, or by using the Default key as described in the next section.

CC91 is the standard MIDI controller number for reverb depth (see Appendix C).

Changing Chorus Depth

The Modulation wheel and/or the Voice Volume knob can be re-assigned to control the depth of the built-in ProKeys Sono chorus. To do this:

1.Press the Edit Mode button.

2.Press either the Wheel Assign (F#4) or Knob Assign (A#4) key.

3.Press B5 to enter “9.”

4.Press C5 to enter “3” so you have entered “93.”

5.Press C6 for “ENTER.”

This setting can be undone by powering the unit off and back on, or by using the Default key as described in the next section.

CC93 is the standard MIDI controller number for chorus depth (see Appendix C).

NOTE: Optional MIDI parameters assigned to the Voice Volume knob, Modulation wheel, or Sustain Pedal jack are not stored when the keyboard is turned off. These parameters will reset to their default values each time the keyboard is powered on.

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Sono ProKeys Sono 61 User Guide ProKeys Sono Audio Control Panel Windows OnlyProKeys Sono 61 User Guide Introduction Built-in Audio Interface ProKeys Sono 61 FeaturesWhat’s in the Box? KeyboardMinimum Requirements Standalone Operation Bus-Powered OperationTop Panel Diagram Top Panel Descriptions Controls and ConnectorsProKeys Sono 61 User Guide £Ç £n £™ Óä Ó£ ÓÓ ÓÎ Ó Óx ÓÈ Rear Panel DescriptionsMidi Connections Hardware ConnectionsAudio Inputs Audio OutputsExample Operating Scenarios Example Setup #1About the audio inputs Example Setup #2To return the Data keys to control the octave shift value ProKeys Sono as a Standalone InstrumentProKeys Sono Premium Voice Selection ProKeys Sono GM sound selection0OWERED Onitors Dapter ProKeys Sono DemosLow latency software monitoring Basic ProKeys Sono Setup in WindowsProKeys Sono Setup in Mac OS Audio Tracks Using ProKeys Sono with a ComputerUSB Recording from a Microphone to an Audio TrackRecording an Instrument to an Audio Track Recording the Aux Inputs to an Audio Track Recording Midi and triggering sounds on a virtual instrument Midi TracksPowered Monitors ProKeys Sono TIP Follow the method described Setting Input Gain ProKeys Sono Audio Setup and ControlsUsing the Microphone and Instrument Inputs Using Direct Monitoring Using the Aux InputsMono Button About ProKeys Sono Audio Control Panel Windows OnlyLatency £ Î Routing Midi Data to and from your ComputerSending Midi to the ProKeys Sono sound engine Routing Midi Signals to your SoftwareRouting Midi Signals from your Software Mono Input Record Key Advanced ProKeys Sono Functions in Edit ModeAudio Options in Edit Mode To select alternate Data button functions Button, Knob, Wheel and Pedal Jack AssignmentsUSB Record Key Data Octave button Assignment OverviewTo assign the Data and buttons to transpose Data Button Assignment OptionsTo assign the Data and buttons to send bank change messages Program ChangeTo assign a Midi controller message to the Modulation wheel To re-assign the Modulation wheel to its default functionWheel Assignment Some examples of useful Midi CCs areKnob Assignment To re-assign the Sustain Pedal jack to its default functionTo re-assign the Voice Volume knob to its default function Pedal AssignmentVel Curve Selection ProKeys Midi Output SettingsRestoring Default Assignments To send data on channel Midi Out Mode KeyLocal On/Off Panic To send a specific program change message in Edit modeTo send a single bank change in Edit mode Sending a Bank Change or Program Change MessageProgram & Bank Changes Midi Messages In-DepthNRPN/RPNs Troubleshooting ProKeys Sono 61 User Guide These sounds are ProKeys Sono premium-quality voices Appendices Useful Midi DataAppendix a General Midi Instruments Key# Drum Sound Appendix B Channel 10 Drum MapRPN MSB Appendix C Standard Midi Controller Numbers Midi CCsAppendix D Additional RPN Messages Appendix E Piano Reset ButtonMic Inputs Technical SpecificationsTechnical Info WarrantyWarranty Terms Warranty Registration Benelux
Top Page Image Contents