Marmitek LM12 user manual Technical data, My modules will not respond to my controller

Page 4

My modules will not respond to my controller.

Make sure that the House Code on all Modules and Controllers are set to the same House Code (A .. P).

My modules will not react to my remote / sensor.

When you use a remote or sensor, you should have at least one TM13 Transceiver or Marmitek Security Console installed in your house. These components will translate the radio signals to the Marmitek X-10 signal on the power line. Only one Transceiver should be installed for all remotes and sensors set to the same House Code.

Am I able to increase the range of my remotes by using more Transceivers?

Yes, you can use more than one TM13 Transceiver in your home when the range of your remotes is not sufficient. The TM13 is using so called collision detection to prevent signals to be disturbed when more than one TM13 is transmitting. TM13’s will wait for a quite power line before transmitting their data. To prevent your Marmitek X-10 System to become slow or to prevent dimming from becoming less smooth, make sure that the TM13 units are placed as far away from each other as possible.

User manual LM12 Lamp Module

1.Set the House Code and Unit Code dial on the front of the Module to the desired codes.

2.Plug the lamp into the Module.

3.Plug the Module into a wall outlet.

You are now able to control your Module with any Marmitek X-10 Controller. It is also possible to control the Module locally. Just switch the regular switch off and on shortly and the lamp will come on (auto sense function).

Technical data

Supply voltage:

230V ±10% 50 Hz

Supply current :

< 20 mA capacitive

Making capacity:

40W to 300W (normal light bulbs only)

Dimmer Speed:

4.4s from 100% to 0% ±0.2s

Signal sensitivity:

15 mVpp min 50 mVpp max at 120 kHz

Input impedance:

> 55 Ohm (L - N) at 120 kHz

X-10 transmission:

1 puls burst on 0, 60 and 120 degrees.

X-10 key codes to respond to:

All units Off, All Lights On, On, Off, Dim, Bright.

When using 3-phase installation:

FD10 (three times) or CAT3000 needed

Fuse:

F 3A 250V 5 x 20 mm

Ambient temperature:

-10° C to + 50° C (operation) - 20° C to + 70° C (storage)

Dimensions:

52x122x33mm (without plug)

Environmental Information for Customers in the European Union

European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the gov- ernment or local authorities. Correct disposal and recycling will help prevent potential negative conse-

quences to the environment and human health. For more detailed information about the disposal of your old equip- ment, please contact your local authorities, waste disposal service, or the shop where you purchased the product.

4

© MARMITEK

Page 3 Page 5
Image 4
Page 3 Page 5
Contents LM12LM12TM Safety Warnings Signal RangeHow does Marmitek X-10 work? AddressesEnglish FAQKnown devices which can cause attenuation are My modules will not respond to my controller Technical dataMy modules will not react to my remote / sensor Reichweite von Signalen DeutschGebrauchsanleitung LM12 Lampenmodule Sicherheitshinweise Wie funktioniert Marmitek X-10?Wie kommt es, dass einige Module spontan an- oder ausgehen? Wir empfehlen um folgende Geräte zu kontrollierenMeine Module reagieren nicht auf meinen Sender Technischen Daten Gebrauchsanleitung LM12 LampenmoduleMeine Module reagieren nicht auf Fernbedienung oder Sensor Adresses Comment fonctionne le système Marmitek X-10?Porté des signaux Produits pouvant créer une atténuation FrançaisMes modules ne fonctionnent pas avec mes contrôleurs Guide utilisateur Module Lampe LM12 Caractéristiques techniquesEspagnol Modo DE Empleo DEL Módulo DE Luces LM12 Avisos DE Seguridad¿Cómo funciona el X-10 de Marmitek? Consignación de direcciónAparatos a controlar Modo de empleo del módulo de luces LM12 Especificaciones técnicasLos módulos no reaccionan al controlador Los módulos no reaccionan al mando a distancia o al sensorImpostazione degli indirizzi Come funziona Marmitek X-10?Portata dei segnali Italiano Domande frequenti Manuale d’istruzioni del Modulo per Lampade LM12Miei moduli non reagiscono al mio controller Miei moduli non reagiscono al telecomando o al sensoreCaratteristiche tecniche Hoe werkt Marmitek X-10? Bereik van signalenAdressering Nederlands Apparatuur die hierbij de moeite waard is om te controlerenHoe komt het dat sommige Modules spontaan aan- of uitgaan? Mijn modules reageren niet op mijn controllerGebruiksaanwijzing LM12 Lamp Module Technische gegevensDeclaration of Conformity Copyrights LM12 TM

LM12 specifications

The Marmitek LM12 is a versatile and innovative wireless home automation device designed to enhance the control and efficiency of your home entertainment systems. It serves as a reliable solution for connecting multiple devices without the mess of tangled wires, thanks to its state-of-the-art wireless technology.

One of the standout features of the LM12 is its ability to transmit signals over long distances. Utilizing advanced RF technology, the LM12 can communicate with devices up to 100 meters away, making it ideal for larger homes or spaces where direct line-of-sight communication is difficult. This range ensures that users can control their audio and video components from almost anywhere in the house.

The LM12 supports various connection types, including IR (infrared) and RF remote controls, providing flexibility in how devices are operated. The device is designed to work seamlessly with a wide range of electronics, including televisions, audio systems, and even smart home devices, allowing users to centralize control without sacrificing compatibility.

Another significant advantage of the Marmitek LM12 is its simple setup process. With a user-friendly interface, even novices can install the device without requiring extensive technical knowledge. The inclusion of detailed instructions ensures that users can quickly become familiar with the system and enjoy its benefits without frustration.

The reliability of the LM12 is bolstered by its built-in security features, which protect against interference and unauthorized access. This makes it a trustworthy option for users concerned about privacy and security in their home automation systems. Additionally, the device boasts energy-efficient operation, which is an attractive feature for environmentally conscious users.

The Marmitek LM12 also supports multiple device connections, meaning that users can control various electronics simultaneously. This multi-device capability enables a more synchronized entertainment experience, essential for modern smart homes where integrated functionality is key.

In summary, the Marmitek LM12 stands out in the realm of home automation by offering exceptional range, versatility, and ease of use. Its commitment to innovation is evident in its wide compatibility with various devices and its user-centric design. Whether you are a tech enthusiast or simply looking to streamline your home entertainment systems, the LM12 provides a reliable and efficient solution that meets the needs of a contemporary lifestyle.
Top Page Image Contents