Security Function | Setting |
The following functions are activated when the Security Function is ON. (a page 27)
¡The security indicator lights up when removing the face plate.
Security Indicator
¡The alarm sounds and the message appears on the screen to warn you to remove the face plate at ACC off.
English
Other Settings
You may need to set the following depending on the devices to be connected.
Using Subwoofer
¡Subwoofer level adjustment (a page 26)
¡Subwoofer low pass filter (a page 26)
Preparation
Clock adjustment
Note: Adjust the clock when “ADJUST” appears on the display.
1 Press [MENU] to display the menu display.
For using the remote control, hold down [SEL] (MENU) for 2 sec. or more.
2 Press []] or [[] to display the DISPLAY menu.
3 Turn [VOL] to select “CLOCK ADJ”. For using the remote control, use [{] or [}].
4 Press [PUSH SEL], and the clock adjustment screen appears.
5 Adjust the setting value.
[[]: Adjusting minutes
[]]: Adjusting hours
q : Forward
w : Backward
6 Press [PUSH SEL], and the menu screen resumes.
For using the remote control, use [BAND] (SET).
7 Press [MENU] to close the menu screen.
For using the remote control, use [BAND] (SET). | For using the remote control, hold down [SEL] |
| (MENU) for 2 sec. or more. |