Panasonic CQ-C7405W manual Hands-Free Phone System, Preparation

Hands-Free Phone System

Be sure to read “Safety Information” in the Operating Instructions for the Hands-Free Phone System before use.

Preparation

Connecting Hands-Free Phone System

Connect the Hands-Free Phone System (CY-BT100N) and	Switch unit
establish the pairing. Refer to the operating instructions
for the Hands-Free Phone System for further information.

Note: This unit is designed only for receiving calls.

It cannot send calls.

Status indicator (Blue LED)

lights: Call waiting/Talking

stays out: Not connected

blinks rapidly: Receiving a call blinks slowly: Pairing/Reconnecting

[Hang-on]/Blue LED

[Hang-up]/Red LED

Operation Flow

1 Press [Hang-on]on Hands-Free Phone System and pick up the phone.

The phone is in the incoming state.

2 Adjust the volume if necessary.

3 Press [Hang-up]on the Hands-Free Phone System and hung up the phone.

Adjust the ring volume

The ring volume is adjustable from this unit. (Setting range: OFF/LOW/MID/HIGH, Default: MID)

[}]: up

[{]: down

Notes:

¡The ring volume is adjustable only when receiving calls.

¡The ring volume is adjustable only when the phone ring comes out of the main unit.

¡The ring volume is also adjustable by turning [VOL].

USH	S EL/	SRS	W		SOURCE	CQ-C7405W
						PWR
LP
O			O
V				W	SQ
					MENU
					TUNE
					TRACK
					FOLDER /P-SET/DISC	/ /SET/APM		TILT
MUTE	D・M					BAND	DISP	OPEN
SBC-SW					LIST

Reject calls

Pressing [Hang-up]allows users to reject a call when the call is coming in.

Bluetooth disconnection/reconnection

Pressing [Hang-up]allows users to temporarily disconnect when the phone is in the waiting state. Pressing [Hang-up]allows users to reconnect when the Bluetooth unit is temporarily disconnected.

14CQ-C7405W