JVC KT-SR1000 manual Running the Antenna Cable

4 Slide JVC PnP all the way into the cradle so

.

that the connector at the bottom of the unit makes proper contact in the cradle.

5 Press the (POWER) button to turn on your JVC PnP.

•If your JVC PnP has been properly connected and the antenna is receiving the SIRIUS signal, you will hear audio.

•If your JVC PnP has not been properly connected, “Antenna Error” will appear on the display of your JVC PnP.

Re-orient the antenna until you hear audio (see “8 Antenna Aiming Options” on page 27).

–Make sure your car is not in garage, or somewhere the satellite signal could be blocked.

Running the Antenna Cable

Before routing the antenna cable, confirm that the antenna is mounted in a good location.

1 Turn off your JVC PnP then remove it from the cradle.

2 Unplug the cigarette lighter adapter from the cigarette lighter and the antenna from the cradle.