2.1 Specifications
Table 2±1 lists the specifications for the
Table 2±1. Specifications
Item | Specification |
|
| |
Imager | Texas Instruments TC215 | |||
Resolution | 1024(H)1024(V) (total imager) | |||
| 1000(H)1017(V) (active pixels) | |||
Pixel size | 12 mm12 mm |
|
| |
Imager size | H: 12.2 mm |
|
| |
| V: 12.0 mm |
|
| |
Synchronization | Internal/external (jumper selectable) | |||
TV mode | 1050 lines/frame (33 blank lines) | |||
| 15 frames/sec |
|
| |
|
|
| ||
Shutter mode | 1050 lines/frame (33 blank lines) | |||
| 10 frames/sec (max) | |||
Sensitivity | 0.29 lux (max) |
|
| |
| 0.35 lux (typ) |
|
| |
| 0.41 lux (min) |
|
| |
| 1/30 integration |
|
| |
| Video output: 100 IRE | |||
| S/N ratio: 48 dB |
|
| |
| Light source: T=2870°K | |||
S/N ratio | 48 dB |
|
| |
MTF | 10 MHz chart, | 35% (typ), 500 nm | ||
White clip | 0.90 ±0.05 V |
|
| |
Setup level | 50 ±10 mV |
|
| |
Output dc level | 0.30 ±0.05 V |
|
| |
Sync level | 0.30 ±0.015 V |
|
| |
Supply voltage | +5 ±0.15 Vdc |
|
| |
| ±12 ±0.4 Vdc |
|
| |
| +12 ±0.4 Vdc |
|
| |
Power consumption (typical) | +5 V at 0.820 A |
|
| |
| +12 V at 0.180 A |
|
| |
| ±12 V at 0.150 A |
|
| |
Total black and white pixel | ||||
| uniformities, less than 5. | |||
Shading (maximum) | 10% | 100% |
| |
Horizontal |
|
|
|
|
| 15 mV | 50 mV | ||
Vertical |
| 20 mV | 70 mV | |
Vertical frequency | 15.46 Hz |
|
| |
Horizontal frequency | 16.234 kHz |
|
| |
Gamma | 1.0 |
|
|
Specifications |