Care and USE

approx. 200°

Electric Shock Hazard: To prevent electrical shock, disconnect power before servicing unit. Use only a properly grounded and polarized electric outlet.

ADJUSTING THE THERMOSTAT

Tank temperature is factory preset to 200°F, which mixes with cool tap water to produce an output water temperature of approx. 110°F.

To reset the tank thermostat to 200°, turn the indicator one notch to the right of vertical.

After adjusting, lift faucet handle for

20 seconds for water to re-heat to the new setting.

■To adjust water temperature, turn thermostat dial on the front of the tank clockwise to increase temperature or turn counter clockwise to decrease temperature. Repeat if necessary. All changes should be minimal.

Scalding Hazard: Do not allow water to boil. May result in severe burns.

PROPERTY DAMAGE

SEASONAL STORAGE/DRAINAGE

Anytime the hot water faucet is not used for extended periods of time, unplug and drain unit. If it is below freezing you will need to unplug the unit and drain it.

■Disconnect power from unit.

■Turn faucet lever to warm and allow water to flow until it is cool.

■Shut the faucet off at the valve.

■Remove drain screw located on bottom center of water tank and drain the water into empty pail.

■Empty the tank and then reinstall drain screw onto the bottom of tank, turning until snug. Do NOT over tighten.

■To place back in working order, fill tank with water and re-connect the plug.

■Regularly inspect the unit for any signs of leakage. If there are signs of water damage, immediately remove the unit from service.

■To avoid water damage from leakage, replace all cut, loose or split tubing.

■A drain pan, plumbed to an appropriate drain or outfitted with a leak detector, should be used in those applications where any leakage could cause property damage.

CLEANING THE FAUCET AND TANK

■Only use mild cleaners to clean the faucet and plastic components.

■Cleaners with acids, abrasives, alkaline or organic solvents will result in deterioration of the plastic components and void the warranty.

FAUCET specifications

The InSinkErator faucet is a remarkable blend of style and functionality, designed to enhance the kitchen experience for homeowners. Known for its innovative technology and user-centric features, this faucet delivers convenience and performance, making it a staple in modern kitchens.

One of the main features of the InSinkErator faucet is its dual-function capability. This faucet not only provides regular hot and cold water, but it also offers instant hot water, which is ideal for preparing beverages, cooking, and even cleaning. The instant hot water dispenser eliminates the wait for hot water to boil, making tasks like tea or instant soup preparation incredibly efficient. This feature is especially cherished by those who lead busy lifestyles or enjoy hosting gatherings.

The design of the InSinkErator faucet showcases elegance and practicality. Available in various styles and finishes, the faucets can seamlessly blend into any kitchen décor, whether it is contemporary or traditional. The ergonomic handle provides a comfortable grip, allowing for precise control of water flow, thus enhancing user experience.

Moreover, the InSinkErator faucet comes equipped with advanced technologies such as the Hot Water Tank system. This system heats water to the ideal temperature of approximately 200 degrees Fahrenheit, ensuring that users always have immediate access to piping hot water. This feature is energy efficient, utilizing minimal power while providing maximum performance.

Another notable characteristic is the faucet's installation versatility. It can easily be mounted alongside your existing kitchen faucet, making it an ideal addition for those looking to upgrade their current setup without extensive plumbing work.

The faucet’s durability is further emphasized through its high-quality materials. Constructed with stainless steel, the InSinkErator faucet resists corrosion and is designed to last, ensuring long-term reliability. Maintenance is also straightforward; the faucet is designed for easy cleaning and comes with a variety of accessories that enhance its usability.

In addition to its practical features, the InSinkErator faucet promotes a sustainable approach to kitchen management. As it provides instant hot water, it reduces reliance on energy-consuming methods like boiling water on the stovetop or using an electric kettle. This not only saves time but also conserves energy.

In summary, the InSinkErator faucet is an exceptional kitchen appliance that combines immediate functionality with aesthetic charm. Its instant hot water capability, sleek design, and durability make it a must-have for modern homeowners seeking efficiency and sophistication in their kitchen.