Hunter Fan 42503-01 warranty For Low Profile Mounting, Step Steps 3-9, Loop Downrod

Page 7

3 • Assembling and Hanging the Fan (Low Profile Only)

WARNING: Fan may fall if not assembled as directed in these installation instructions.

You can assemble your fan for standard or angle mounting as shown in steps 3-1 – 3-4 on the previous page. For low profile mounting (ceilings less than 8 feet high), see steps 3-5 – 3-11 on this page.

For Low Profile Mounting:

Note: For low profile mounting, the downrod is replaced with the low profile washer.

3-5. Unbundle the wires from the fan.

3-6. Remove the screw from the hanger ball on the downrod, and then remove the hook from the hanger ball.

CAUTION: e adapter has a special coating on the threads. Do not remove this coating; the coating prevents the downrod from unscrewing. Once assembled, do not remove the downrod.

3-7. Remove the set screw from the adapter.

3-8. Install the hook and two neoprene washers onto the adapter using the set screw. the top of the hook must hang over the adapter. Note: e screw should be tight, but still allow the hook to rotate slightly.

3-9. Place the low profile washer (lip up) into the canopy. Be sure the green ground wire is pointing up toward the ceiling.

3-10. Align the holes in the washer with the holes in the adapter. Assemble securely with three low profile screws.

3-11. Raise the fan and place the hook on the adapter through the loop on the ceiling plate.

Step 3-6

Step 3-8

Steps 3-9 – 3-10

Low Profile Washer

7

Loop

 

 

Downrod

Step 3-11

with Hook

 

 

Low Profile Screw

42503-01 • 02/08/06

Hunter Fan Compan

Page 6 Page 8
Image 7
Page 6 Page 8
Contents For Your Records and Warranty Assistance Welcome Table of ContentsHunter Fan Company Standard Mounting hangs from Installer’s Choice and Optional AccessoriesUnderstanding Mounting and Installer’s Choice Considering Optional AccessoriesChecking Your Fan Parts Installing Multiple Fans?Getting Ready Gathering the ToolsStep Steps 2-3 Installing the Ceiling PlateStep Assembling and Hanging the FanFor Standard or Angled Mounting Steps 3-1Step Steps 3-9 For Low Profile MountingLoop Downrod Dual Switch Wiring Single Switch Wiring Wiring the FanDual Switch Wiring Single Switch WiringSteps 5-2 Installing the Canopy and Canopy Trim RingLocate the tab indicators, small bumps on top of tabs Will flex out releasing the trim ring from the canopyDetail Assembling the BladesSteps 6-1 Steps 7-1 Completing Your InstallationTo attach the lower switch housing, connect the upper plug Housing with three housing assembly screwsTo Change Airflow Direction Operating and Cleaning Your Ceiling FanSave Energy and Money While Protecting the Environment Beat the High Cost of CoolingProblem Noisy operation Problem Nothing happens fan does not moveProblem Excessive wobbling

42503-01 specifications

The Hunter Fan 42503-01 is a remarkable ceiling fan that seamlessly combines style, performance, and innovative technology to enhance any room's decor while providing efficient air circulation. As a part of Hunter Fan's extensive line of high-quality ceiling fans, the 42503-01 stands out due to its unique features and attention to detail.

One of the main attractions of the Hunter Fan 42503-01 is its aesthetic appeal. The fan boasts a sleek, modern design with a sophisticated finish that can complement various interior styles, from contemporary to traditional. The fan blades are crafted from high-quality materials, available in different finishes to match the decor of any room while providing a striking visual element.

Performance is key in any ceiling fan, and the 42503-01 does not disappoint. Equipped with a powerful, efficient motor, this fan delivers an impressive airflow, ensuring optimal circulation throughout the space. Homeowners will appreciate its whisper-quiet operation, which allows for comfortable use in bedrooms, living rooms, or even home offices without disrupting daily activities.

The Hunter Fan 42503-01 also features an energy-efficient design, making it an eco-friendly choice for those looking to reduce their energy consumption. The fan is designed to operate on lower wattages while still delivering robust airflow, translating to potential savings on energy bills.

Additionally, the 42503-01 is integrated with advanced technologies to enhance user experience. The fan is compatible with smart home systems, allowing for easy control through mobile devices or voice command. This integration offers convenience for users who prefer to adjust settings without manually operating the fan.

Another notable characteristic is the versatility of the Hunter Fan 42503-01. It can be used in various settings, whether it's a spacious living area, a cozy bedroom, or a covered patio. The fan’s adjustable speed settings enable users to customize airflow to their comfort level, ensuring a pleasant atmosphere at all times.

In summary, the Hunter Fan 42503-01 is a perfect blend of elegance and functionality. With its stylish design, powerful and quiet motor, energy-efficient operation, smart home compatibility, and adaptability for various spaces, it represents an excellent investment for those seeking to elevate their living environment.
Top Page Image Contents