Steps 8-7 | Hunter Fan 41922-01 specification

8 • Installing the Light Kit (Continued)

Steps 8-5 – 8-6

8-5.

Plug

Connector

8-6.

To attach the lower switch housing, connect the upper plug connector from the motor to the lower plug connector in the lower switch housing assembly.

Note: Both plug connectors are polarized and will only fit together one way. Make sure the connectors are properly aligned before connecting them. Incorrect connection could cause improper operation and damage to the product.

Place the lower switch housing assembly over the upper switch housing. Align the side screw holes in the upper and lower switch housings. Attach the lower switch housing to the upper switch housing with three housing assembly screws.

	Lower Switch
	Housing
	Plug
12	Connector
	Detail

Housing

Assembly Screw

8-7. To install each shade, first loosen the three thumbscrews.

8-8. Raise the shade to the light fixture. Tighten the thumbscrews securely.

8-9. Install four candelabra bulbs (60 Watt maximum each). Note: Glass shade style may vary.

umbscrews

Shade

Bulb

Steps 8-7 – 8-9

Hunter Fan Company

41922-01 • 02/26/07