6• Installing the Canopy and Canopy Trim Ring
6-1. Holding the canopy, raise the fan off the hook.
6-2. Align the slots in the canopy with the tabs on the ceiling plate.
6-3. Raise the canopy over the ceiling plate. Rotate the canopy clockwise until the tabs on the ceiling plate totally engage with the slots in the canopy.
6-4. Loosely assemble the three canopy screws into the canopy one at a time. Once all three screws are in, tighten them.
6-5. Using both hands, push the canopy trim ring up to the top of the canopy. e canopy trim ring will snap and lock into place.
Should you need to remove the canopy trim ring, follow these steps:
1.Locate the tab indicators, small bumps on top of tabs.
2.Press firmly on opposite sides of the ring towards the canopy. e tabs will flex out releasing the trim ring from the canopy.
Step 6-3
Steps 6-4 – 6-5
41922-01 • 02/26/07 | Hunter Fan Company |
