Hunter Fan 41922-01 warranty Installing the Light Kit, Steps 8-1

Page 11

WARNING: Use only the light fixture supplied with this fan model.

8-1. To attach the upper switch housing, partially install two housing assembly screws into the switch housing mounting plate.

8-2. Feed the upper plug connector through the center opening of the housing.

8-3. Align the keyhole slots in the housing with the housing assembly screws.

8-4. Turn the housing counterclockwise until the housing assembly screws are firmly situated in the narrow end of the keyhole slots. Install the remaining housing assembly screw into the housing. Tighten all three screws firmly.

CAUTION: Make sure the upper switch housing is securely attached to the switch housing mounting plate. Failure to properly attach and tighten all three assembly screws could result in the switch housing and light fixture falling.

8 • Installing the Light Kit

Steps 8-1 – 8-3

Housing

Assembly Upper

Screw Switch

Housing

11

Step 8-4

41922-01 • 02/26/07

Hunter Fan Company

Page 10 Page 12
Image 11
Page 10 Page 12
Contents For Your Records and Warranty Assistance Hunter Fan Company Table of ContentsWelcome Angle Mounting recommended for a vaulted or angled ceiling Installer’s Choice and Optional AccessoriesStandard Mounting hangs from Getting Ready Installing Multiple Fans?Steps 2-3 Installing the Ceiling PlatePlate StepSteps 3-4 Assembling and Hanging the FanSteps 3-1 Example Jumpers Settings Setting the Remote Transmitter and ReceiverSteps 5-3 Wiring the FanStep Steps 6-4 Installing the Canopy and Canopy Trim RingSteps 7-1 Assembling the BladesDetail Steps 8-1 Installing the Light KitSteps 8-7 Steps 9-1 Operating the Remote Control and Mounting the HolderCold weather, use upward air flow pattern Operating and Cleaning Your Ceiling FanTo Change Airflow Direction Problem Excessive wobbling TroubleshootingProblem Nothing happens fan does not move Problem Noisy operation
Top Page Image Contents