Hunter Fan 45062-01 installation manual Wiring the Fan, Fan White

Receiver

A

F

B D

E

C

Step 5-3

A• Ground/Green

Step 5-4

B• Ceiling Black

•Receiver Black: “LIVE IN”

C• Ceiling White

•Receiver White: “NEUTRAL IN”

Step 5-5

D• Fan Black with a white stripe

•Receiver Red: “LIGHT OUT”

E• Fan Black

•Receiver Black: “FAN OUT”

F• Receiver White: “COMMON OUT”

• Fan White Steps 5-3 – 5-5

Large Wire

Connector

All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician.

Small Wire

Connector

5 • Wiring the Fan

5-1. Before attempting installation, make sure the power is still off.

5-2. To connect the wires, hold the bare metal leads together and place a wire connector over them, then twist clockwise until tight. For all these connections use the wire connectors provided.

CAUTION: Be sure no bare wire or wire strands are visible after making connections.

5-3. Using a large wire connector, connect the ground wire from the ceiling (grounding) to the green wire (grounding) from the ceiling plate and the green ground wire from the downrod.

5-4. Using the large wire connectors, connect the white wire (grounded) and the black wire (ungrounded) from the ceiling as follows:

•The white (common) power wire (grounded) from the ceiling to the white wire (grounded) from the receiver (marked on red tag “NEUTRAL IN”)

•The black power wire (ungrounded) from the ceiling to the black wire (ungrounded) from the receiver (marked on red tag “LIVE IN”)

5-5. Using the small wire connectors, connect the wires from the fan as follows:

•The black wire with a white stripe (ungrounded) from the fan to the red wire (ungrounded) from the receiver (marked on white tag “LIGHT OUT”)

•The black wire (ungrounded) from the fan to the black wire (ungrounded) from the receiver (marked on white tag “FAN OUT”)

•The white wire (grounded) from the fan to the white wire (grounded) from the receiver (marked on white tag “COMMON OUT”)

5-6. Turn the splices upward and push them carefully back through the ceiling plate into the outlet box.

5-7. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box.

8

45062-01 • 07/01/09 • Hunter Fan Company