Eiki LC-XB20, LC-SB20 Remote Control Code, Wireless Mouse Operation, Part Names and Functions

Part Names and Functions

Remote Control Code

This projector has eight different remote control codes (Code 1-Code 8); the factory-set, initial code (Code 1) and the other seven codes (Code 2 to Code 8). This switching function prevents remote control interference when operating several projectors or video equipment at the same time. (Change the remote control code for the projector first before changing that for the remote control. See “Remote control” on page 40.)

1	While pressing the MENU button, press the IMAGE button
	number of times corresponding to each remote control code
	number. Each time you press the IMAGE button, the code is
	changed sequentially. (See the list below.)
2	To initialize the remote control code for the remote control,
	slide the RESET/ON/ALL-OFF switch to the RESET, and then
	to the ON. The initial code is Code 1.
	Remote Control Code	Number of Times of
		Pressing IMAGE Button
	Code 1	1
	Code 2	2
	Code 3	3
	Code 4	4
	Code 5	5
	Code 6	6
	Code 7	7
	Code 8	8

IMAGE button

While pressing the MENU button, press the IMAGE button number of times corresponding to the remote control code for the projector.

MENU button

Wireless Mouse Operation

The remote control can be used as a wireless mouse for your computer. Before operating the wireless mouse, connect your computer and the projector with the supplied USB cable. (See page 17 for connection.) When the Pointer function is used, the wireless mouse is not available.

L-CLICK button

Acts as left click while the projector and a computer are connected with a USB cable.

PRESENTATION POINTER button

Move the pointer on the screen with this button.

R-CLICK button

Acts as right click while the projector and a computer are connected with a USB cable.

14