Eiki LC-XB25, LC-SB20, LC-XB20 owner manual Part Names and Functions, Terminal, u i o

Part Names and Functions

Terminal

q	w		e		r		t	y
	COMPUTER IN 1	AUDIO IN			VIDEO		USB
	DVI - I	R	L (MONO)
	*	SERVICE PORT		S-VIDEO		COMPUTER /
						COMPONENT
	RESET

AUDIO IN

AUDIO OUT

MCI COMPUTER IN 2 /

COMPONENT IN /

MONITOR OUT

(VARIABLE)

Do not press this button. This button is used for optional accessories.

u i o

q COMPUTER IN 1 DVI-I y AUDIO IN COMPUTER / COMPONENT

Connect computer output (Digital/Analog DVI-I type) or Multi Card Imager (optional) to this terminal. (p17)

wSERVICE PORT

This jack is used to service this projector.

eAUDIO IN

Connect the audio output from video equipment connected to r or i to this jack. (When the audio output is monaural, connect it to L (MONO) jack.) (p17, 18)

rVIDEO

Connect the composite video output from video equipment to VIDEO jack. (p18)

tUSB (Series B)

When operating the connected computer with the remote control, connect USB port of your computer to this connector with a USB cable. (p17)

Connect the audio output (stereo) from a computer or video equipment connected to q or u to this jack. (p17, 18)

uCOMPUTER IN 2 /COMPONENT IN / MONITOR OUT

This terminal is switchable and can be used as computer input , component input, RGB Scart 21-Pin Video input, or monitor output. Set the terminal up as either Computer input or Monitor output properly before using this terminal. An optional cable is required when using this terminal as component input or RGB Scart 21-Pin Video input. (p17, 18)

(This terminal outputs analog signal from COMPUTER IN 1 DVI-I terminal only when using as Monitor out.)

iS-VIDEO

Connect the S-VIDEO output from video equipment to this jack. (p18)

oAUDIO OUT (VARIABLE)

Connect an external audio amplifier to this jack. (p17, 18)

This terminal outputs sound from AUDIO IN terminal (e or y).

*A built-in micro processor which controls this unit may occasionally malfunction and need to be reset. This can be done by pressing the RESET button with a pen, which will shut down and restart the unit. Do not use the RESET function excessively.

10