Connecting to Optional
Equipment
Connecting to an amplifier equipped with two channel analog stereo or Dolby Surround
1Connect the Left and Right AUDIO OUT1 jacks of the DVD Player to the audio left and right in jacks on your amplifier, receiver, or stereo system using the supplied audio cables (A).
Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/Video receiver equipped with a
1Connect one of the DVD Player’s DIGITAL OUT jacks (OPTICAL G or COAXIAL F) to the corresponding in jack on your amplifier. Use an optional digital (optical G or coaxial F) audio cable.
2You will need to activate the player’s digital audio output (see ‘Personal Preferences’ on page 14).
TV
X Z 
Y
G | A | F |
AMPLIFIER
Digital Multi-channel sound
A digital
Warning:
Due to the DTS Licensing agreement, the digital output will be in DTS digital out when DTS audio stream is selected.
Notes:
–If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all.
–Six Channel Digital Surround Sound via digital connection can only be obtained if your receiver is equipped with a Digital
–To see the audio format of the current DVD in the On- Screen Display, press the AUDIO button.
–There are two sets of AUDIO OUT jacks on the DVD Player. The AUDIO OUT2 jacks could be used if you want to connect the DVD Player to a second piece of equipment, such as another stereo. Use audio cable to connect the AUDIO OUT2 Right and Left jacks to the Right and Left AUDIO IN jacks on the other equipment.
Remember, you only need one audio and one video connection between the TV and the DVD Player, so you do not have to use all the jacks on the DVD Player.
12PREPARATION
