Hunter Fan 9103x, 9701x manual Maintenance, To Clean, Cleaning Grill and Blade

Maintenance

ENGLISH

This fan is permanently lubricated and will not require additional lubri- cation (oil) for the life of the fan.

This fan requires little maintenance and contains no user serviceable parts. DO NOT try to fix it yourself. Contact qualified service personnel if servicing is needed.

TO CLEAN:

1.	Before cleaning, turn fan off
	and unplug from electrical out-
	let. Wipe off excess dust with a
	lintfree cloth.
2.	To ensure adequate air circula-
	tion to the motor, keep vents

located at the rear of the motor housing free from dust accumu- lation. A vacuum cleaner hose can be used to clean these vents.

3.DO NOT immerse the fan in water or any other liquid.

CLEANING GRILL AND BLADE:

1.	Turn the fan off and unplug
	from the electrical outlet.
2.	Disassemble grills by carefully
	removing the screw on the bot-
	tom of the ring. See Figure 4.
3.	Remove the ring, lower deco-

9703x models), and front grill. See Figure 5.

4.Grills and blades may be cleaned with mild soap and wa- ter.

5.Use a soft, slightly damp cloth to wipe the remaining fan parts.

6.DO NOT allow water or any other liquid to get into the mo- tor housing or base.

7.Reassemble the fan after blades and grills have dried completely. Align the grills, re- place the ring, replace the dec- orative piece (only on 9103x & 9703x models) and replace the screw.

NOTE: To replace the decora- tive piece, partially install the screw, then hold the decorative piece between the open ends of the ring. Finish tightening the screw.

8.DO NOT plug fan into an elec- trical outlet until it has been fully reassembled.

ENGLISH

Grill

Ring

Decorative Piece

(Only on 9103x & 9703x models)

rative peice (only on 9103x &

Decorative Piece

(Only on 9103x & 9703x models)

Screw

Decorative Piece

(Only on 9103x & 9703xRing models)

Back Grill

Front

Grill

Decorative Piece

(Only on 9103x & 9703x models)

Figure 4

Figure 5

44801-01 [6] 02/07/2008 44801-01 [7] 02/07/2008