Samsung HT-F9750W/EN, HT-F9750W/XN, HT-F9750W/TK, HT-F9750W/ZF manual Wireless Network, Wpspbc

NOTES

You can get the Network values from your Internet provider.

7.When finished entering all the values, select OK, and then press the E button. The home cinema verifies the network connection and then connects to the network.

Wireless Network

You can setup a wireless network connection in three ways:

-Wireless Automatic

-Wireless Manual

-WPS(PBC)

Before you configure the wireless network connection, disconnect any wireless network device currently connected to the product or, if applicable, the product's current wired connection.

❑Wireless - Automatic

After following Steps 1 to 3 in "Configuring Your Network Connection" on page 26:

1.In the Network Settings screen, change Network type to Wireless. The product searches for and then displays a list of the available networks.

Network Settings

4.When finished, select Done, and then press the E button. The product verifies the network connection and then connects to the network.

NOTES

You should be able to find the security code or pass phrase on one of the set up screens you used to set up your router or modem.

❑Wireless - Manual

If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually.

After following Steps 1 to 3 in "Configuring Your Network Connection" on page 26:

1.	In the Network Settings screen, change Network
	type to Wireless. The product searches for and
2.	then displays a list of the available networks.
	Scroll through the list, select the desired network or
3.	Add Network, and then press the E button.
	If you selected a network in Step 2, go to Step 6.
4.	If you selected Add Network, go to Step 4.
	Enter your wireless network or wireless router's
	name.
	•	Enter numbers directly using the number buttons
	•	on your remote control.
		Enter letters by selecting a letter with the ▲▼◄►
	•	buttons, and then pressing the E button.
		To display capital letters (or redisplay small letters

04 Settings

Select your network type.

Network type Wireless

Wireless network

si-ap iptime iptime5G

KIMING_VTOWER

TIAS

Refresh WPS(PBC)

You can connect your Blu-ray player to the internet. Please select which wireless network to use.

if capital letters are displayed), select	, and
then press the E button.
• To display symbols and punctuation, select
123#&, and then press the E button. To
redisplay letters, select 123#&, and then press
the E button.

When finished, select Done, and then press the E button.

5.	On the Security type screen that appears, use the
	▲▼ buttons to select the network's Security type,

2.Select the desired network, and then press the E button.

3.On the Security screen, enter your network's security code or pass phrase.

Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with ▲▼◄► buttons, and then pressing E button.

and then press the E button. On the next screen,
enter your network's security code or pass phrase.
•	Enter numbers directly using the number buttons
•	on your remote control.
	Enter letters by selecting a letter with the ▲▼◄►
	buttons, and then pressing the E button.

When finished, select Done, and then press the E button. The product searches for the network.

English 27