Samsung HT-D4550/EN, HT-D4500/EN, HT-D4500/ZF Speaker Settings, Audio, Level, Distance, Test Tone

Setup

Audio

Speaker Settings

Settings

Display		Speaker Settings
Audio
	Level
Network
	Distance
System	Test Tone	: Off
Language
Security
General
Support
		> Move " Enter ' Return

Level

You can adjust the balance and level for each speaker.

Adjusting Front/Centre/Surround/Subwoofer Speaker Level

•The volume level can be adjusted in steps from -6dB to +6dB.

•The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.

Settings

Display			Level
Audio
	Front L	◄	0 dB
Network
	Front R	:	0 dB
System	Center	:	0 dB
	Surround L	:	0 dB
Language
	Surround R	:	0 dB
Security	Subwoofer	:	0 dB
General	Test Tone	:	Off
Support
		> Move		< Change ' Return

Distance

If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the front, centre, surround and subwoofer speakers.

•You can set the Speaker Distance between 1ft(0.3m) and 30ft(9.0m).

Settings

Display			Distance
Audio
	Front L	◄ 10(ft) 3.0(m)
Network
	Front R	:	10(ft) 3.0(m)
System	Center	:	10(ft) 3.0(m)
	Surround L	:	10(ft) 3.0(m)
Language
	Surround R	:	10(ft) 3.0(m)
Security	Subwoofer	:	10(ft) 3.0(m)
General	Test Tone	:	Off
Support
			> Move	< Change ' Return

Test Tone

Use the Test Tone feature to check the speaker connections.

Press the ◄, ► buttons to select ON.

•A test tone will be sent to Front L Center Front R Surround R Surround L Subwoofer in order so you can make sure the speakers are set up correctly.

To stop the test tone, press the ◄, ► buttons to select Off.

Settings

Display		Speaker Settings
Audio	Level
Network	Distance
System
	Test Tone	◄ On
Language
Security
General
Support
		> Move " Enter ' Return

✎NOTE

When HDMI Audio is ON (audio is produced through TV speakers), the Test Tone function is not available.

30 English