Samsung HT-D4500/XE, HT-D4500/EN, HT-D4500/ZF Edit Mode Menu Yellow C, Properties, Move, Detail

To use the Reset function, follow these steps:

1.In the Account Management menu, select Reset, and then press the ENTER button. The Reset screen appears.

2.Enter the your Security password. This is the password you entered if you set up a BD or DVD Parental rating (See page 38). If you did not, enter 0000.

3.After a few moments, Smart Hub automatically resets. The screen may go black, then Smart Hub re-appears. In a few moments, it starts the re-initialization procedure.

4.To complete the re-initialization, go to Step 4 in Starting Smart Hub for the First Time. (See page 54)

✎NOTE

If you forgot your password, press the STOP ( ) button on the front panel of the product for more than 5 seconds with no disc inserted.

Properties

The Properties menu item lists three functions that display information about Smart Hub :

Detail

Lists information about Smart Hub including version number, the number of services installed, memory usage, and the unique product ID.

Terms of Service Agreement

Displays the Terms of Service Agreement.

The Edit Mode Menu - YELLOW (C)

The functions in the Edit Mode menu let you manipulate the application in the My Applications section of the Smart Hub screen. Using these functions, you can lock and unlock access to some application, New Folder and move application to them, rename folders, delete application, and change the position of application on the screen.

To access the Edit Mode Menu, and then select a menu item, follow these steps:

1.Press the YELLOW (C) button on your remote. The Edit Mode menu bar appears on the bottom of the screen.

2.Press the ▲▼◄► to select a menu item, and then press the ENTER button.

The functions in the Edit Mode Menu bar are described below.

✎NOTE

Some menu items may not appear on the screen. To see these items, press the ◄► to move to the screen edge, and then press one more time to reveal the items.

You can close the bar by highlighting the X on the bottom right side, and then pressing the ENTER button.

Move

The Move function lets you change the screen position of a application. To use the Move function, follow these steps:

1.Press the YELLOW (C) button on your remote.

2.Select a application, and then press the ENTER button. A check appears above the application.

3.Press the ▲▼◄► to select Move, and then press the ENTER button. A position change icon appears above the application.

4.Press the ▲▼◄► to move the icon. Press the ENTER button when the icon is in the position of your choice. The application moves to its new location.

05 Network Services

English 59