Samsung AVR700RH/ELS manual Dolby Pro Logic llx Effect, Input button 8 times

Page 16

Dolby Pro Logic llx Effect

This function works only in Dolby PRO LOGIC IIX MUSIC Mode.

REMOTE CONTROL

1 Press MODE button to select ‘MUSIC’ Mode.

2 Press EFFECT button.

•Each time you press this button, C-WIDTH ➝ DIMENSION ➝ PANORAMA will be

selected in turn.

3 Press …† button to select Dolby Pro Logic IIx effect you want.

• C-WIDTH: You can set from 0 to 7.

•DIMENSION: You can set from 0 to 7.

• PANORAMA: You can Set it ON or OFF.

4 Repeat the steps 2 and 3 to set the Dolby Pro Logic IIx effect.

To Exit Setup Mode

•Wait for about 5 seconds .

MAIN UNIT

1 Press and hold SURROUND button for about 5 seconds.

•“SETUP MODE” appears on the display and enters into Setup Mode.Press

	2 INPUT button 8 times.
		• “DPL ll x MODE”appears on the display.	OPERATION
	3	Press SURROUND button.	OPERATION
		Press SURROUND button.
		• Each time you press this button, DIMENSION ➝ PANORAMA ➝ C-WIDTH will

be selected in turn.

Press SELECT(, ) button to select Dolby Pro Logic llx

4 effect you want.

5 Repeat the steps 3 and 4 to set Dolby Pro Logic llx effect.

To Exit Setup Mode

•Wait for about 5 seconds or turn VOLUME CONTROL of the main unit. “SETUP MODE OFF” appears on the display and exits Setup Mode.

Dolby Pro Logic llx Effect

•C-WIDTH : Sound will be output from center speaker only. Front-left and front-right speaker give sound field effect only. In addition, sounds are output in different volumes from Front-Left, Front-Right Speaker and Center Speaker.

•DIMENSION : Adjust the sound balance if the sound is unbalanced to front or rear speaker.

•PANORAMA : Give the effect expanding and covering the sound from front-left and front-right Speaker to both walls.

29

30

Image 16

Contents

AV-R700 Safety Warnings Precautions Features Description Front PanelAlways replace both batteries at the same time Do not expose batteries to heat or flameConnecting the Speakers Connecting External Components Connecting Video ComponentConnecting External Component Connecting Audio Component/ 5.1 ChannelBefore Using AV Receiver Press the Function buttonMethod 2 Press Direct Function Select button This unit will be turned on or offSetting the Speaker SettingtheSpeakerPress SPK SEL. button to select the speaker you want Press …† button to set the speaker as you wantPress …† button to set the speaker distance Repeat the steps 1 and 2 to set the speaker distancePress Input button 2 times Press Select , button to set the speaker distanceSetting DRC Test TonePress Test Tone button Press and hold Surround button for about 5 seconds Press Input button 4 times Press Surround button Press Input button 5 times Test Tone OutputSetting Speaker Level Dolby Pro Logic llx Mode Press Mode buttonPress Surround button briefly to select DPL llx Mode Press Select ButtonInput button 8 times Dolby Pro Logic llx EffectDolby Pro Logic llx Effect NEO6 Mode Press NEO6 Mode buttonNEO 6 Mode Press Select , buttonSFE Mode Press SEF Mode buttonSFE Mode Press Surround button briefly to select ‘SFE’ Mode. EachPress EX/ES button EX/ES ModePress Input button 10 times For Surround Mode and Input Signal Stereo ModePress Surround button briefly to select ‘STEREO’ Presetting Radio Stations Listening to RadioRDS is not available for AM broadcasts Display gives you the PTY codes described to the rightConvenient Functions Operating TV with Remote Control TV Brand Code ListIf the code matches the TVs code, the TV will be turned off Brand Code NumberOn the remote control flash Press Power button to turn onPoint the remote control toward the VCR VCR Brand Code ListBefore Calling for Service √√ Product Protection Function œœSpecifications Memo

Related manuals

Manual 27 pages 49.72 Kb

Manual 27 pages 4.57 Kb

Manual 27 pages 4.32 Kb