![](/images/new-backgrounds/1243323/24332341x1.webp)
![](/images/new-backgrounds/1243323/24332341xi2.webp)
![](/images/new-backgrounds/1243323/24332341xi3.webp)
Listening
to Radio
You can listen to the chosen band (FM, AM broadcast stations) by using either the automatic or manual tuning operation.
![](/images/new-backgrounds/1243323/24332341xi8.webp)
![](/images/new-backgrounds/1243323/24332341xi9.webp)
Presetting
Radio Stations
You can preset to 30 stations including FM and AM broadcasting.
REMOTE CONTROL
Ex) If you preset FM 89.1 station in 2ch
1 Press TUNER button.
• Each time you press this button, FM ➝ AM will be selected in turn.
2 Press Select button and then TUNING/CH(,
) button to select 89.1.
• Refer to step 2, page 39, to tune in automatically and manually.
3 Press TUNER MEMORY button.
REMOTE CONTROL
1 Press TUNER button.
•Each time you press this button, FM ➝ AM will be repetitively selected.
2 Select frequency.
•Automatic Tuning 1 :
1)Press ENTER button to select PRESET.
2)Press TUNING/CH( ,
) button to select the preset frequency.
•Automatic Tuning 2 :
1)Press ENTER button to select MANUAL
2)Press and hold TUNING/CH( ,
) button to automatically tune in frequency.
•Manual Tuning :
1)Press ENTER button to select MANUAL.
2)Press TUNING/CH( ,
) button briefly to increase or decrease frequency by step by step.
MAIN UNIT
1 Press INPUT button to select FM or AM.
2 Select the frequency.
•Automatic Tuning :
Press and hold TUNING/CH( ,
) button to automatically tune in frequency.
•Manual Tuning :
Press TUNING/CH( ,
) button briefly to increase or decrease frequency by step by step.
• Tuner number will blink on the display.
4 Press TUNING/CH( ,
) button to select 2ch.
• You can select from 1 to 30ch.
5 Press TUNER MEMORY button.
• Tuner number will disappear and 89.1 station will be preset in 2ch.
6 To preset other stations, repeat the steps 2 to 5.
To Listen to Preset Station
•Press Select button of the remote control to select the PRESET and press TUNING/CH ( ,
) button.
RADIO OPERATION
To Listen to Mono/Stereo
Press MO/ST button.
•Each time you press this button, STEREO, MONO will be selected in turn.
•If you select MONO in the area with weak reception and blanket area, you can listen to clear broadcasting without noise.
•This function works only in Remote Control.
39 | 40 |