![](/images/new-backgrounds/1243323/24332333x1.webp)
![](/images/new-backgrounds/1243323/24332333xi2.webp)
![](/images/new-backgrounds/1243323/24332333xi3.webp)
NEO:6
Mode
You can play back 2 channel sound in 6.1 channel of 360 degree surround when enjoying music or movie.
REMOTE CONTROL
1 Press NEO:6 MODE button.
• Each time you press this button, MUSIC ➝ CINEMA will be selected in turn.
To Exit Setup Mode
• Wait for about 5 seconds.
NEO : 6 Mode
MAIN UNIT
1 Press SURROUND button briefly to select “NEO:6” Mode.
•Each time you press this button, DPL ll x ➝ NEO:6 ➝ SFE ➝ STEREO will be selected in turn.
2 Press SELECT(
,
) button.
•Each time you press this button, MUSIC ➝ CINEMA will be selected in turn.
To Set Sound Image of Center Speaker
If TV (or screen) is installed high, you can feel the balance of sound and image by raising the sound image of Center Speaker.
1 Press and hold SURROUND button for about 5 seconds.
•“SETUP MODE” appears on the display and enters into Setup Mode.
2 Press INPUT button 9 times.
•“NEO:6 MODE” appears on the display.
3 Press SURROUND button.
•
4 Press SELECT( ,
) button to set the sound image you want.
•You can set the sound image from 0 to 5.
To Exit Setup Mode
•Waitforabout5secondsorturn VOLUME CONTROL ofthemainunit.‘SETUPMODEOFF’appears onthedisplayandexitsSetupMode.
Caution!
OPERATION
Caution!
•NEO:6 Mode can be used in multi channel signal encoded to Dolby Digital or DTS.
•Pro Logic works only for PCM audio signals with sampling frequency of 32KHz, 44KHz or 48KHz..
This mode decodes 2 channel signals to high precision digital matrix decoder.
DTS NEO:6 decoder discretes 2 channel sound to Discrete 6.1 channel sound.
•MUSIC : NEO:6 MUSIC Mode is used as optimized to music according to played signal.
•CINEMA : NEO:6 CINEMA Mode is used as optimized to movie according to played signal.
•You can use this function to set the sound image of Center Speaker only in the main unit.
31 | 32 |