✎You may be required to enter a PIN code (password) when connecting the Bluetooth device to the Wireless Audio Portable. If the PIN code input window appears, enter <0000>.
✎Supported sampling frequencies for aptX and SBC decoding are 44.1kHz and 48kHz.
✎The AVRCP feature is not supported. You cannot connect to a Bluetooth device that supports only the HF (Hands Free) function.
✎Connect only to a Bluetooth device that supports the A2DP (AV) function.
✎Only one Bluetooth device can be paired at a time.
USING THE SOUNDSHARE FUNCTION
Connect the Wireless Audio Portable to a Samsung TV that is compatible with Bluetooth to enjoy TV sound wirelessly.
Connect
SOFTWARE UPGRADE
Samsung may offer upgrades for the Wireless Audio Portable's system firmware in the future.
To upgrade the firmware, visit samsung.com and find your model by name to locate the available download.
Download the firmware file onto a USB drive and follow the below instructions to upgrade the product.
SERVICE
5V 500mA
AUX IN
USING AUX IN FUNCTION
To enjoy music from an external audio device that does not support Bluetooth communication, use AUX IN of the product.
| SERVICE |
| VOL |
| 5V 500mA |
MUTE |
|
FUNC. | AUX IN |
BASS |
|
| DC 14V 2.5A |
Earphones | Audio Cable |
jack | (not supplied) |
|
External device
1.Connect the audio cable to the AUX IN terminal.
FUNC.
2. Press the 
button to select the AUX function.
✎Before moving or installing this product, be sure to turn off the
power and disconnect the power cord.
1.Turn on the Samsung TV and Wireless Audio Portable.
• Set 'Add New Device' to 'On' in the TV's 'SoundShare
Settings' menu. (Refer to the TV's user manual for details.)
FUNC.
2.Press the 
button to change the mode of the Wireless Audio
Portable to 
. A message asking whether to proceed with Bluetooth pairing appears.
•The 
blinks in the standby mode.
3.Select <Yes> on the TV screen. The Wireless Audio Portable pairs with the TV.
•The 
indicator blinks, and then stops blinking.
•The Wireless Audio Portable Bluetooth pairing is complete.
•If you want to cancel an existing pairing and pair the
FUNC.
Wireless Audio Portable to another TV, press the 
button
for 3 seconds with the unit in 
mode.
✎SoundShare is supported by some Samsung TVs released after 2012. Check whether your TV supports SoundShare before you begin. (For more information, refer to the user's guide of your TV.)
✎The optimal pairing distance is 1m or less.
1.Turn off the product.
2.Insert a USB drive containing the firmware upgrade into the
Service (USB) port on the back of the product.
FUNC.
3.Press the 
and 
buttons for 5 seconds at the same time. The update process starts.
•All LEDs indicators will blink during the update process.
4.The LEDs will turn off automatically after the update process is complete.
•Do not disconnect the power or remove the USB drive while upgrades are being applied.
•The product will turn off automatically after completing the firmware upgrade.
•When firmware is upgraded, settings you have made will return to their default (factory) settings. We recommend you write down your settings so that you can easily reset them after the upgrade.
•When the battery indicator LED is red, do not update the product. Doing so could cause the product to malfunction.
✎If the firmware fails to upgrade, we recommend formatting the USB drive in FAT16 and trying again.
✎For upgrading purposes, do not format the USB drive in NTFS format because it is not a supported file system.
✎Depending on the manufacturer, the USB may not be supported.