Samsung DVD-HD850/XEL manual Setting Up the Audio Options, ENG-50, ENG-51

DVDHD850 XEL-00_Eng2 23/02/2005 15:37 Page 50

C H A N G I N G S E T U P M E N U

Setting Up the Audio Options

Audio Options allows you to setup the audio device and sound status settings depending on the audio system in use.

C H A N G I N G S E T U P M E N U

❶Dolby/DTS Digital Out

-PCM : Converts to PCM(2CH) audio.

-Bitstream : Outputs Dolby Digital or DTS Bitstream via digital output.

Select Bitstream when connecting to a Dolby Digital and DTS Decoder.

1

With the unit in Stop mode, press the MENU button.

2

Press the /❷ buttons to select Setup, then press the ❿ or ENTER button.

Language Setup	❿
Audio Setup	❿
Display Setup	❿
Parental Setup :	❿
DivX(R) Registration	❿

Setup

Note

• There is no analog audio output when you play a DTS disc.

❷MPEG-2 Digital Out

- PCM : Converts to PCM(2CH) audio.

- Bitstream : Outputs MPEG-2 Bitstrean via digital output. Select Bitstream when connecting to an MPEG-2 Decoder.

❸Dynamic Compression

-On : To select dynamic compression.

-Off : To select the standard range.

❹ PCM Down Sampling

- On : Select this when the Amplifier connected to the player is not 96KHz compatible.

In this case, the 96KHz signals will be down converted to 48KHZ.

3

Press the /❷ buttons to select Audio Setup, then press the ❿ or ENTER button.

4

Press the /❷ buttons to select the desired item, then press the ❿ or ENTER button.

	Language Setup		❿
	Audio Setup		❿
	Display Setup		❿
	Parental Setup :		❿
Setup	DivX(R) Registration		❿
		AUDIO SETUP
Dolby/DTS Digital Out		: PCM
MPEG-2 Digital Out		: PCM
Dynamic Compression		: On
PCM Down Sampling		: On

▼

To make the setup menu disappear, press the MENU button.

- Off : Select this when the Amplifier connected to the player is 96KHz compatible. In this case,

all signals will be output without any changes.

Note

Even when PCM Down sampling is Off

•Some discs will only output down sampled audio through the digital outputs.

HDMI

-If your TV is not compatible with compressed multi-channel formats (Dolby Digital, DTS, MPEG), you should set Digital Audio to PCM.

-If your TV is not compatible with LPCM sampling rates over 48kHz, you should set PCM Down sampling to On.

Note

•To make the Setup menu disappear, press the MENU button.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

Changing Setup Menu

ENG-50 ENG-51