DVDHD850
S E T U P
Tour of the Remote Control
Chapter 2
C O N N E C T I O N S
Choosing a Connection
1
17
2
3 | 18 |
4 | 19 |
5 | 20 |
21 | |
6 | 22 |
7 |
|
8 | 23 |
9 |
|
10 | 24 |
11 | 25 |
| 26 |
12 | 27 |
13 | 28 |
14 | 29 |
15 | 30 |
16 | 31 |
| |
| 32 |
| 33 |
1.DVD POWER Button Turns the power on or off.
2.NUMBER Buttons
3.PROG Button
4.STEP Button
Advances play one frame at a time.
5.VOL (+,
6.TV/VIDEO Button
Press to display all of the available video sources ( i.e., TV, Cable, Video)
7.SEARCH Buttons ( 
/ 
)
Allow you to search forward/backward through a disc.
8.STOP Button ( 
)
9.SKIP Buttons ( 
/ 
) Use to skip the title, chapter or track.
10.MENU Button
Brings up the DVD player’s menu.
11.RETURN Button Returns to a previous menu.
12.AUDIO Button
Use this button to access various audio functions on a disc.
13.ZOOM Button Enlarges DVD picture.
14.VIDEO SEL. Button Selects Video output format.
15.REPEAT
16.BOOKMARK Button
17.TV POWER Button Turns the TV’s power on or off.
18.CLEAR Button
Use to remove menus or status displays from the screen.
19.INSTANT SKIP Button
This function skips playback ahead 10 seconds.
20.INSTANT REPLAY Button
This function is used to replay the previous 10 seconds of a movie from the current position.
21.CH ( 
, 
) Buttons Channel selection.
22.OPEN/CLOSE ( 
) Button To open and close the disc tray.
23.PLAY/PAUSE Button ( 
) Begin/Pause disc play.
24.INFO Button
Displays the current disc mode.
25.DISC MENU Button Brings up the Disc menu.
26.ENTER/ ❷➛❿ Buttons This button functions as a toggle switch.
27.ANGLE Button
Use to access various camera angles on a DVD.
28.EZ VIEW Button
The aspect ratio of a picture can easily be adjusted according to the screen size of your TV (16:9 or 4:3).
29.HDMI SEL. Button
HDMI or DVI Output resolution setup.
30.REPEAT Button
Allows you to repeat play a title, chapter, track, or disc.
31.SUBTITLE Button
32.SHUTTLE DIAL (Search mode) Performs fast motion play.
33.JOG DIAL (Step mode) Operates frame by frame play. In CD mode, performs track search.
The following shows examples of connections commonly used to connect the DVD player with a TV and other components.
Before Connecting the DVD Player
-Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.
-Refer to the user’s manual of the additional components (such as a TV) you are connecting for more information on those particular components.
Connecting to a TV (SCART)
-Using the SCART, connect the SCART (EXT) terminal on the rear of the DVD Player to the SCART (IN) terminal of your TV
-If your TV is not equipped with a SCART you can select one of the following alternative connections:
Connection to a TV (Video CVBS )
1
Using video/audio cables, connect the VIDEO (yellow)/AUDIO (red and white) OUT terminals on the rear of the DVD player to the VIDEO (yellow)/AUDIO (red and white) IN terminals of your TV.
2
Turn on the DVD player and TV.
RED WHITE YELLOW
or
Audio Cable Video Cable
RED 
WHITE YELLOW
3
Press the input selector on your TV remote control until the
Video signal from the DVD player appears on the TV screen.
Note
-Noise may be generated if the audio cable placed too close to the power cable.
-If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 17 to 18)
-The number and position of terminals may very depending on your TV set. Please refer to the user's manual of your TV.
-If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of the DVD player.
-If you press the VIDEO SEL. button when DVD Player is in stop mode or no disc is inserted, the Video Output mode changes in the following sequence:
HDMI/COMPONENT(P-SCAN) ➝ SCART RGB ➝ SCART VIDEO)
-When the Video Output in Setup menu is set to
Connections
|