Samsung DVD-HD850/XEL Connection to a TV S-Video, Connection to a TV Interlace, ENG-12, ENG-13

DVDHD850 XEL-00_Eng1 23/02/2005 15:39 Page 12

C O N N E C T I O N S

Connection to a TV (S-Video)

-Connecting to your TV using an S-Video cable.

-You will enjoy high quality images. S-Video separates the picture element into black and white(Y) and color(C) signals to present clearer images than regular video input mode. (Audio signals are delivered through the audio output.)

1

Using an S-Video cable (not included), connect the S-VIDEO

OUT terminal on the rear of the DVD player to the

S-VIDEO IN terminal of your TV.

2

Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of your TV.

Turn on the DVD player and TV.

3

Press the input selector on your TV remote control until the S-

Video signal from the DVD player appears on your TV screen.

4

Set the Video Output to COMPOSITE/S-VIDEOin the Display

Setup menu. (See pages 52 to 54)

You can use the VIDEO SEL. button to change the Video

Output mode. (See page 11)

Note

-If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 17 to 18)

-The number and position of terminals may very depending on the TV set. Please refer to the user's manual of your TV.

C O N N E C T I O N S

Connection to a TV (Interlace)

-Connecting to your TV using Component video cables.

-You will enjoy high quality and accurate color reproduction images. Component video separates the picture element into black and white(Y), blue(PB), red(PR) signals to present clear and clean images. (Audio signals are delivered through the audio output.)

1

Using component video cables (not included), connect the COMPONENT VIDEO OUT terminals on the rear of the DVD player to the COMPONENT IN terminals of your TV.

2

Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of your TV.

Turn on the DVD player and TV.

3

Press the input selector on your TV remote control until the Component signal from the DVD player appears on the TV screen.

4

Set the Video Output to Component (I-SCAN)in the Display

Setup menu. (See pages 52 to 54)

You can use the VIDEO SEL. button to change the Video

Output mode. (See page 11)

Note

-If Video output is incorrectly set to S-Video with the Component cables connected, the screen will turn red.

-If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 17 to 18)

-The component terminal of your TV may be marked “R-Y, B-Y, Y” or “Cr, Cb, Y” instead of “PR, PB, Y” depending on the manufacturer. The number and position of terminals may very depending on the TV set. Please refer to the user's manual of your TV.

Connections

ENG-12 ENG-13