Samsung BD-H5500/EN, BD-H5500/ZF Media Play, Contact Samsung, Terms of Service Agreement, Reset

By USB

To upgrade by USB, follow these steps:

2.Use the ▲▼ buttons to select On, and then press the v button.

If there is a new software version available,

Media Play

1.Visit www.samsung.com/ bluraysupport.

2.Download the latest USB software upgrade zip archive to your computer.

3.Unzip the zip archive to your computer. You should have a single RUF file with the same name as the zip file.

4.Copy the RUF file to a USB flash drive.

5.Make sure there is no disc in the player, and then insert the USB flash drive into the USB port of the player.

6.In the player’s menu, go to Settings > Support > Software Upgrade.

7.Select By USB.

✎✎ NOTES

■■ No disc should be in the product when you upgrade the software using the USB Host jack.

the player notifies you with a popup message.

1.To upgrade the firmware, select Yes in the Pop-up. The player turns off automatically, then restarts, and begins the download. (Never turn the player on or off manually during an upgrade.)

2.The update progress popup appears.

3.When the update is complete, the player turns off again automatically.

4.When the update is completed, the player will restart automatically.

✎✎ NOTES

■■ The upgrade is complete when the player turns off, and then turns on again by itself.

■■ Never turn the player off or on manually during the update process.

■■ Samsung Electronics takes no legal

Playing a Commercially Recorded

Disc

1.Press the 8 button to open the disc tray.

2.Place a disc gently into the disc tray with the disc's label facing up.

3.Press the 8 button to close the disc tray. Playback starts automatically.

Playing Files on a USB Device

There are two methods you can use to play or view multimedia files located on a USB device through your player.

3.Use the ▲▼ buttons to select Photos, Videos or Music, and then press

the v button. The Photos, Videos & Music screen appears listing the content of the device. Depending on how the contents is arranged, you will see either folders, individual files, or both.

✎✎ NOTES

■■ Even though the player will display folders for all content types, it will only display files of the Content Type you selected in Step 3. For example, if you selected music, you will only be able to see music files. You can change this selection by returning to the Photos, Videos & Music screen and going to Step 3 in Method 2 below.

■■ When the software upgrade is done, check the software details in the software Upgrade menu.

■■ Do not turn off the player during the software upgrade. It may cause the player to malfunction.

■■ Software upgrades using the USB

responsibility for player malfunction caused by an unstable Internet connection or consumer negligence during software upgrade.

Contact Samsung

Provides contact information for assistance

Method 1

1.Turn the player on.

2.Connect the USB device to the USB port on the front panel of the player. The New Device Connected pop-up appears.

4.If necessary, use the ▲▼▲▼◀▶ buttons to select a folder, and then press the v button.

5.Select a file to view or play, and then press the v button.

6.Press the RETURN button to exit a

Host jack must be performed with a USB flash memory stick only.

Auto Upgrade Notification

If you have connected the player to your network, and then set Auto Upgrade Notification on, the player automatically notifies you when a new software version is available for the player.

To set Auto Upgrade Notification on, follow these steps:

with your player.

Terms of Service Agreement

Lets you view the general disclaimer regarding third party contents and services.

Reset

Returns all settings to their factory defaults

Play disc		Photos		Videos		Music
		New device connected.
			123
		Photos
No disc		Videos
		Music
		> Move		" Enter	' Return
App 1 App 2	App 3	App 4	App 5	More	Change Device	Settings
✎✎ NOTES

folder or the EXIT button to return to the Home screen.

7.Go to pages 17~19 for instructions that explain how to control playback of videos, music, and pictures on a USB device.

1.Select Auto Upgrade Notification, and then press the v button.

except for the network settings.

■■ If the pop-up does not appear, go to Method 2.

15