Settings, Wired Network, Menu Navigation

Connecting to a Network Router

Settings

You can connect your player to your network router using one of the methods illustrated below.

To use the DLNA network functionality, you must connect your PC to your network as shown in the illustrations.

Wired Network

Broadband modem

(with integrated router)

Broadband service

Router

Broadband service

Broadband

modem

✎✎ NOTES

■■ Internet access to Samsung's software update server may not be allowed, depending on the router you use or your ISP's policy. For more information, contact your ISP (Internet Service Provider).

■■ DSL users, please use a router to make a network connection.

The Initial Settings Procedure

●●The Home screen will not appear if you do not configure the initial settings.

●●The OSD (On Screen Display) may change in this player after you upgrade the software version.

●●The access steps may differ depending on the menu you selected.

●●After the initial settings process is complete, you can then operate the panel buttons and remote control.

After you have connected the player to your TV, turn on the TV and player. When you turn on the player the first time, the player's Initial Settings screen appears on the TV. The Initial Setting procedure lets you set the On Screen Display (OSD) and menu languages, the aspect ratio (screen size), the network type, and connect the player to your network.

✎✎ NOTES

■■ The Home menu will not appear if you do not configure the initial settings except as noted below.

■■ If you press the BLUE (D) button during network setup, you can access the Home menu even if the network setup is not completed yet.

■■ When you return to the Home menu, the full screen mode is cancelled automatically.

■■ If you want to display the Initial Setting screen again to make changes, press the ■ button on the top panel of the player for more than 5 seconds with no disc inserted. This resets the player to its default settings.

■■ After the initial settings process is complete.

you can operate the HDMI-CEC function.

■■ If you want to use the Anynet+(HDMI-CEC) function to aid in the initial set up process, please follow the instructions below.

1)Connect the player to an Anynet+(HDMI- CEC) compliant Samsung TV using HDMI Cable.

2)Set the Anynet+(HDMI-CEC) feature to On in both the TV and the player.

3)Set the TV to the Initial Settings Procedure.

■■ If you leave the player in the stop mode for more than 5 minutes without using it, a screen saver will appear on your TV. If the player is left in the screen saver mode for more than 25 minutes, the power will automatically turn off.