Samsung HT-E6750W/TK, HT-ES6200/XN, HT-E6750W/XN, HT-ES6200/EN manual Initial Settings Procedure

Settings

The Initial Settings Procedure

•The Home menu will not appear if you do not configure the initial settings.

•The OSD (On Screen Display) may change in this product after you upgrade the software version.

•The access steps may differ depending on the menu you selected.

1 . Turn on your TV after connecting the product, and then turn on the product. When you turn on the product for the first time, the product automatically displays the Initial Settings Language screen.

NOTE

￿The product starts the wireless network connection procedure by default. If you want to set up a wired connection, select Skip, and then go to "Configuring Your Network Connection" on page 32 after you have completed the Initial Settings Procedure.

￿If you skip wireless network setup here, go to "Wireless Network" on page 33 to set up the product's wireless network connection later.

5 . The product searches for and then displays all available wireless router network connections.

04 Settings

Initial Settings > On-Screen Language

Select a language for the on-screen displays.

	▲	Select English as the
Dansk	Nederlands
		on-screen menu
English	Eesti keel	language.
Suomi	Français	Next
Deutsch	Ελληνικά
Hausa	Magyar
Asusu Igbo	Italiano
	▼

Initial Settings > Network Settings (2/5)

Select your wireless router from the list.

KIMING_VTOWER

TIAS

si-ap

surlwang5

Add Network

1 / 4

Refresh

WPS(PBC)

Previous

Next

Skip

2 . Use the ▲▼◄► buttons on the remote to select the desired language, and then press the Ebutton twice. The Start screen appears.

3 . Press the Ebutton to start setup. The Network Settings screen appears.

Initial Settings > Network Settings (1/5)

The next step is to set up a wireless network using an internal LAN Adapter.

Previous

Next

Skip

If you want to connect to your wired network, plug in a network cable.

6 . Use the ▲▼ buttons to select a router, and then press the Ebutton. The Next button is highlighted.

7 . Press the Ebutton to continue. The Security Key screen appears.

NOTE

￿If you have a WPS(PBC) compatible router, select WPS(PBC) instead, press the Ebutton, and then follow the directions on the screen. When done, go to Step 10.

4 . Press the Ebutton to set up the product's wireless network connection or select Skip, and then press the Ebutton to skip network setup. If you selected Skip, go to Step 12.

English 23

HT-E6750W_XU_0223.indd 23 2012-02-23 오후 4:41:23