Samsung HT-E6750W/ZF, HT-ES6200/XN manual AllShare Settings, To Set the Soft AP Security Key

Settings

4 . The Connecting pop-up appears, followed by the Connected pop-up. When it closes, you should see the device listed on the Wi-Fi Direct screen as connected.

NOTE

The wired or wireless network connection will be disconnected when you use the Wi-Fi Direct function.

Soft AP

Soft AP lets you connect other Wi-Fi devices to your network through the product and lets them access the Internet.

It requires that you create a security key which you must enter into the other Wi-Fi devices when you are connecting them to the network.

1 . In the Home screen, select Settings, and then press the E button.

2 . Select Network, and then press the E button.

3 . Select Soft AP, and then press the E button.

4 . Select On or Off, and then press the E button.

< To Set the Soft AP Security Key >

1 . On the Soft AP screen, select Security Key, and then press the E button. The Security Key screen appears.

2 . On the Security key screen, enter a security key. Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with the ▲▼◄► buttons, and then pressing the E button.

3 . When done, use the ▲▼◄► buttons to move to DONE at the bottom of the screen, and then press the E button.

When you connect a Wi-Fi device through the connection procedure on the device, you must enter the security key you created here into the appropriate field.

36 English

AllShare Settings

The AllShare Settings screen lists your network connected AllShare devices and their IP addresses. Through this screen, you can allow a device to access the product, deny access, or delete the device from the AllShare list.

1 . In the Home screen, select Settings, and then press the E button.

2 . Select Network, and then press the E button.

3 . Select AllShare Settings, and then press the

Ebutton.

4 . Select a device, and then press the E button. The AllShare Settings pop-up appears.

5 . Select Allow, Deny, or Delete from List, and then press the E button.

The AllShare Settings screen only displays devices if you have established networked connections to AllShare devices. For more information about AllShare networked devices, see pages 39~40.

HT-E6750W_XU_0222.indd 36 2012-02-22 오후 2:07:46