Samsung HT-E6750W/SQ Anynet+ HDMI-CEC, BD Data Management, Middle of playback, Read/write speed

	Anynet+ (HDMI-CEC)
	• Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user
	manual of your TV.
	• This function is not available if the HDMI cable does not support CEC.
	• If your Samsung TV has an Anynet+ logo, then it supports the Anynet+ function.
	BD Data Management
	• In the external memory mode, disc playback may be stopped if you disconnect the USB device in
	the middle of playback.
	• Only those USB devices formatted in the FAT file system (DOS 8.3 volume label) are supported.
	We recommend you use USB devices that support USB 2.0 protocol with 4 MB/sec or faster
	read/write speed.
	• The Resume Play function may not work after you format the storage device.
	• The total memory available to BD Data Management may differ, depending on the conditions.
	DivX® Video On Demand
	• For more information about DivX(R) VOD, visit “http://vod.divx.com”.
	Front Display
Settings	• You cannot change the brightness of the	button and the VOL +, - button.
	Speaker Settings
	• When Speaker Selection is selected to TV Speaker, audio is produced through TV speakers.
	• Running the Auto Sound Calibration function takes about 3 minutes.
	• Make sure there is no disc in the product when you run the Auto Sound Calibration function.
	• If the ASC microphone is disconnected during the Auto Sound Calibration setup, the setup will be
	cancelled.
	• When the Auto Sound Calibration function is activated, the DSP, Dolby Pro Logic ll and SFE Mode
	will not work.
	• If the product is connected to external devices or other components (such as an iPod, AUX,
	D. IN), the Auto Sound Calibration Setup may not work properly.
	HDMI audio
	• When HDMI audio output to the TV speaker, it is automatically down-mixed to 2 channels.
	Audio Return Channel
	• When Anynet+ (HDMI-CEC) is Off, the Audio Return Channel function is not available.
	• Using an HDMI cable not certified for ARC (Audio Return Channel) may cause a compatibility
	problem.
	• The ARC function is only available if an ARC-compliant TV is connected.
	Digital Output
	• Digital Output can be activated when Speaker Selection is selected to TV Speaker.

English 59

07 Appendix

HT-E6750W_XU_0222.indd 59 2012-02-22 오후 2:09:13