Samsung SPL300WVX/XT, SPL300WX/EN, SPL300WVX/EN manual Connecting an AV device using a D-Sub cable

First, check that the AV device and your projector are turned off.

Connect the [HDMI/DVI IN] terminal at the back of the projector to the DVI output terminal of the digital output device using an HDMI/DVI cable.

-When connecting to the HDMI output terminal of the digital output device, use an HDMI cable.

-For the supported input signals, refer to "AV Timing(HDMI)".

Connect the [PC 1/DVI AUDIO IN] terminal of the projector to the Audio out terminal of your digital output device using an audio cable (Not supplied).

- If it is connected with a HDMI cable, connecting an audio cable (Not supplied) is not needed.

Connecting an AV device using a D-Sub cable

First, check that the AV device and your projector are turned off.

Connect the [PC IN (1 or 2)] terminal at the back of the projector to the D-Sub terminal of your AV device using a D-Sub cable.

- For supported input signals, refer to the "AV Timing (D-Sub)".

Connect the [PC 1/DVI AUDIO IN] or [AUDIO IN 2] terminal at the back of the projector to the Audio out terminal of your AV device using an audio cable (Not supplied).

Connecting a component output AV device