Samsung SPL300WX/XY, SPL300WX/EN, SPL300WVX/EN, SPL300WVX/XT Keep the power cord away from heaters

Page 3

Always unplug the unit by holding the power plug. Pulling the power cable may damage the inside of it.

zThere is a danger of fire.

Unplug the power plug before cleaning the product.

zThere is a danger of electric shock or fire.

Power Related Installation Related Cleaning and Use Related

TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

zThere is a danger of fire.

When installing the product in a cabinet or on a shelf, make sure the front end of the base does not protrude.

zDropping the product may damage it or cause injury.

Keep the power cord away from heaters.

zThe coating of the power cord may melt and cause electric shock or fire.

Do not install the product in locations exposed to oil, smoke, moisture or water (rainwater), or in a vehicle.

zThere is a danger of electric shock or fire.

Do not install the product in locations with poor ventilation such as a bookshelf, closet, etc.

zAn increase in the internal temperature may cause a fire.

Do not install on an unstable location, or on a stand smaller than the product.

Image 3 Contents
Page Insert the power plug firmly so that it does not come loose Keep the power cord away from heaters Place the product on the ground carefully There is a danger of fire or explosion Correct disposal of batteries in this product Europe only Front/Upper Side An optical engine adopting new LCD technologyUnpacking Lens coverLED Indications Clearing Indicator ProblemsRear Side CenterPower MenuMove VOL MuteReturn ExitSupported Display Modes PC Timing D-Sub/HDMI ResolutionAV Timing VIDEO/S-VIDEO AV Timing D-SubFormat MHzPage Zoom and Focus Adjustment Installing the ProjectorScreen Size and Projection Distance Leveling with Adjustable FeetScreen Rear of Projector Connecting a PC using a HDMI/DVI cable Connecting a PC using a D-Sub cableConnecting an HDMI-Compatible Device Connecting an External MonitorConnecting a component output AV device Connecting an AV device using a D-Sub cableConnecting using a Video/S-Video cable Connecting an External Speaker Selecting an input source Turning on the projectorDVD Receiver Mode StandardVideo Edit NameZoom1 Color Temperature Offset GainFor the RGB signal of Hdmi mode NormalFine Used to fine tune the PC screen Maximum and then perform Fine Adjustment againDefault settings InstallAuto Rgbpc Rgbav YPbPrAV Logo Blue BlackMedium Language Menu OptionPosition TransparencyOff 10 min 20 min 30 min Installation and Connection Menu and Remote ControlScreen and External Source Page Clean the projector using a soft dry cloth Type 1 Model Code SPL300WX Location of the ventilation openings CIS Middle East & Africa
Related manuals
Manual 39 pages 10.71 Kb Manual 40 pages 37.68 Kb Manual 2 pages 53.6 Kb Manual 41 pages 10.12 Kb Manual 42 pages 3.49 Kb Manual 36 pages 52.13 Kb Manual 39 pages 38.22 Kb Manual 38 pages 29.63 Kb Manual 41 pages 19.56 Kb Manual 41 pages 25.84 Kb Manual 46 pages 43.07 Kb Manual 39 pages 51.86 Kb Manual 38 pages 63.58 Kb Manual 39 pages 11.79 Kb